CPWD Analysis of Rates · Flooring
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm
- Item number
- 11.42
- Analysis basis
- Detail of cost for 10 sqm
- Priced inputs
- 6
- Derived rate
- ₹850.10 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 11.42 — Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm — is derived from 6 priced inputs for 10 sqm and works out to ₹850.10 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Cement mortar 1 : 4 (1 cement : 4 coarse
- sand)
- Cement for slurry over bed @ 3.3 kg per
- sqm
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| Rate as per Item Number 3.9 of SH: MortarsRate as per item 3.9Sub-analysis | cum | 0.24 | 4,211.70 | 1,010.81 | |
| 9999 | Mortar for pointing in white cementMaterial | L.S. | 404.3 | 2.27 | 917.76 |
| 0367 | Portland CementPortland Cement (OPC-43 Grade)Material | tonne | 0.033 | 5,156.00 | 170.15 |
| 0123 | Mason 1st classMason 1st classLabour | day | 2 | 897.00 | 1,794.00 |
| 0115 | CoolieLabour | day | 2 | 736.00 | 1,472.00 |
| 9988 | Sundries i/c carriage of cement etc.Material | L.S. | 269.1 | 2.27 | 610.86 |
- TOTAL
- 5,975.58
- Add 1 % Water charges on “W”
- 59.76
- TOTAL
- 6,035.34
- Add GST on “X” (multiplying factor 0.2127)
- 1,283.72
- TOTAL
- 7,319.06
- Add 15% CPOH on “Y”
- 1,097.86
- TOTAL
- 8,416.92
- Add Cess @ 1% on “Z”
- 84.17
- Cost of 10 sqm
- 8,501.09
- Cost for 1 sqm
- 850.11
- Say
- 850.10
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 826. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works