Skip to main content

CPWD Analysis of Rates · Flooring

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)

Light shade pigment using white cement

Item number
11.20.1
Analysis basis
Details of cost for 10 sqm.
Priced inputs
9
Derived rate
1,402.00 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 11.20.1 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement — is derived from 9 priced inputs for 10 sqm and works out to ₹1,402.00 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

  • Cement mortar 1 : 4 (1 cement : 4 coarse
  • sand)
  • Grey cement slury @ 4.4kg @sqm
  • White cement for grouting
CodeInputUnitQuantityRate (INR)Amount (INR)
7070Chequered precast cement concrete tiles 22mm thick using marble chips of size 6mm - Light shade using white cement including 10% wastageChequered precast cement concrete tiles 22 mm thick using marble chips of size 6 mm - Light shade using white cementMaterialsqm11392.004,312.00
9977Carriage of tilesMaterialL.S.40.432.2791.78
Rate as per Item Number 3.9 of SH: MortarsRate as per item 3.9Sub-analysiscum0.224,211.70926.57
0367Portland CementPortland Cement (OPC-43 Grade)Materialtonne0.0445,156.00226.86
0368White CementMaterialtonne0.04810,500.00504.00
0875Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigmentRed, chocolate, orange, buff or yellow (red oxide of iron) light shade pigmentMaterialkilogram3.0865.00200.20
0124Mason 2nd classMason 2nd classLabourday1.6816.001,305.60
0115CoolieLabourday2736.001,472.00
0101BhistiLabourday1816.00816.00
TOTAL
9,855.01
Add 1 % Water charges on “W”
98.55
TOTAL
9,953.56
Add GST on “X” (multiplying factor 0.2127)
2,117.12
TOTAL
12,070.68
Add 15% CPOH on “Y”
1,810.60
TOTAL
13,881.28
Add Cess @ 1% on “Z”
138.81
Cost of 10 sqm.
14,020.09
Cost of 1 sqm.
1,402.01
Say
1,402.00

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 787. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works