Skip to main content

CPWD Analysis of Rates · Drainage

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete

700 mm dia. R.C.C. pipe

Item number
19.6.8
Analysis basis
Details of cost for 10 metre
Priced inputs
8
Derived rate
2,932.50 / metre

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 19.6.8 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 700 mm dia. R.C.C. pipe — is derived from 8 priced inputs for 10 metre and works out to ₹2,932.50 per metre after water charges, GST, CPOH and cess. The full build-up is below.

  • (in 2.5 m. length = 4 Nos.)
  • 4 Nos.
  • Cement of 4 joints = 4x0.0062 = 0.0248
  • cum = 0.037 tonne
  • Fine sand for 4 joints = 0.0124x4 =
  • 0.0496 cum = 0.05 cum
CodeInputUnitQuantityRate (INR)Amount (INR)
1707R.C.C. pipes NP2 class 700 mm diaMaterialmetre101,605.0016,050.00
1721R.C.C. collars NP2 class 700 mm diaMaterialeach4175.00700.00
0367Portland Cement (OPC-43 grade)Materialtonne0.0375,156.00190.77
0983Fine sand (zone IV)Materialcum0.05980.0049.00
0123Mason 1st classMason 1st classLabourday1.03897.00923.91
0124Mason 2nd classMason 2nd classLabourday1.03816.00840.48
0114BeldarLabourday2.06736.001,516.16
0101BhistiLabourday0.42816.00342.72
TOTAL
20,613.04
Add 1 % Water charges on “W”
206.13
TOTAL
20,819.17
Add GST on “X” (multiplying factor 0.2127)
4,428.24
TOTAL
25,247.41
Add 15% CPOH on “Y”
3,787.11
TOTAL
29,034.52
Add Cess @ 1% on “Z”
290.35
Cost of 10 metre
29,324.87
Cost of 1 metre
2,932.49
Say
2,932.50

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1711. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works