Skip to main content

CPWD Analysis of Rates · Drainage

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

150 mm diameter

Item number
19.1.2
Analysis basis
Details of cost for 30 metre
Priced inputs
8
Derived rate
695.80 / metre

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter — is derived from 8 priced inputs for 30 metre and works out to ₹695.80 per metre after water charges, GST, CPOH and cess. The full build-up is below.

  • Added 10% allowance for breakage
  • Cement of 50 joints = 0.036 tonne
  • or plain gaskin @ 0.18 kg per joint =
  • 0.18x50 = 9 kg
CodeInputUnitQuantityRate (INR)Amount (INR)
1855Stoneware pipes grade A (60 cm long) 150 mm diaMaterialeach55138.007,590.00
0367Portland Cement (OPC-43 grade)Materialtonne0.0365,156.00185.62
0983Fine sand (zone IV)Materialcum0.019980.0018.62
1881Spun yarnMaterialkilogram961.00549.00
0123Mason 1st classMason 1st classLabourday1.5897.001,345.50
0124Mason 2nd classMason 2nd classLabourday1.5816.001,224.00
0114BeldarLabourday4736.002,944.00
0101BhistiLabourday1816.00816.00
TOTAL
14,672.74
Add 1 % Water charges on “W”
146.73
TOTAL
14,819.47
Add GST on “X” (multiplying factor 0.2127)
3,152.10
TOTAL
17,971.57
Add 15% CPOH on “Y”
2,695.74
TOTAL
20,667.31
Add Cess @ 1% on “Z”
206.67
Cost of 30 metre
20,873.98
Cost of 1 metre
695.80
Say
695.80

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1691. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works