Skip to main content

CPWD Analysis of Rates · Cladding Work

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete

Item number
8.4
Analysis basis
Details of cost for facia 1.5m long and 0.15m
Priced inputs
4
Derived rate
568.55 / facia 1

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete — is derived from 4 priced inputs for facia 1 and works out to ₹568.55 per facia 1 after water charges, GST, CPOH and cess. The full build-up is below.

  • wide
  • Cement mortar 1 : 4 (1 cement :4 coarse sand)
  • 1.5x0.15x0.02 = 0.005cum.
CodeInputUnitQuantityRate (INR)Amount (INR)
0123Mason 1st classMason 1st classLabourday0.3897.00269.10
0115CoolieLabourday0.3736.00220.80
9999Scaffolding, expoxyMaterialL.S.392.2788.53
Rate as per Item Number 3.9 of SH: MortarsRate as per item 3.9Sub-analysiscum0.0054,211.7021.06
TOTAL
599.49
Add 1 % Water charges on “W”
5.99
TOTAL
605.48
Add GST on “X” (multiplying factor 0.2127)
128.79
TOTAL
734.27
Add 15% CPOH on “Y”
110.14
TOTAL
844.41
Add Cess @ 1% on “Z”
8.44
Cost for 1.5 metre
852.85
Cost per metre
568.57
Say
568.55

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 389. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works