Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete
- Item number
- 8.30.1
- Analysis basis
- skirting 200mm
- Priced inputs
- 8
- Derived rate
- ₹1,976.45/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 8.30.1 (Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 18 mm thick) is derived from 8 priced inputs for skirting 200mm and works out to ₹1,976.45 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- long Area = 0.2x30= 6 sqm.
- Area = 0.2x30= 6 sqm.
- Teak shade prelaminated Particle board (three
- layer medium density) = 6.0 sqm.+
- Total = 6.6 sqm.
- For dressing and fixing particle board to skirting
- Painting with ready mixed priming coat at back
- Add wastage @ 10% = 0.6sqm.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 7478 | MAT | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 18 mm thickPrelaminated flat pressed three layer or graded wood particle board with one side decorative and other side balancing lamination, (medium density) Grade I, Type II conforming and marked to IS : 12823 (exterior grade) 18 mm thick | sqm | 6.6 | 590.00 | 3,894.00 |
| 9977 | MAT | Carriage of particle board | L.S. | 8.11 | 2.27 | 18.41 |
| 7048 | MAT | Rawl plug 50 mm (designation 10 no.)Rawl plug 50 mm (designation 10) | each | 102 | 24.00 | 2,448.00 |
| 9999 | MAT | Labour for drilling holes | L.S. | 130 | 2.27 | 295.10 |
| 0112 | LAB | Carpenter 2nd class | day | 0.77 | 816.00 | 628.32 |
| 0114 | LAB | Beldar | day | 0.86 | 736.00 | 632.96 |
| 9999 | MAT | Sundries (Screws, sand paper) | L.S. | 53.82 | 2.27 | 122.17 |
| SUB | Rate as per item no 13.85.1 of SH : FinishingRate as per item 13.85.1 | sqm | 6 | 70.35 | 422.10 |
- TOTAL
- 8,461.06
- Add 1 % Water charges on “W-A”
- +80.39
- TOTAL
- 8,541.45
- Add GST on “X-A” (multiplying factor 0.2127)
- +1,726.99
- TOTAL
- 10,268.44
- Add 15% CPOH on “Y-A”
- +1,476.95
- TOTAL
- 11,745.39
- Add Cess @ 1% on “Z-A”
- +113.23
- Cost of 6 sqm.
- 11,858.62
- Cost of 1 sqm.
- 1,976.44
- SAY
- ₹1,976.45
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 429
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 429. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.