CPWD Analysis of Rates · Cladding Work
Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete
25 mm thick
- Item number
- 8.30.2
- Analysis basis
- Details of cost for skirting 200mm wide and 30m
- Priced inputs
- 8
- Derived rate
- ₹2,463.10 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 8.30.2 — Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 25 mm thick — is derived from 8 priced inputs for skirting 200mm and works out to ₹2,463.10 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- long Area = 0.2x30= 6 sqm.
- Area = 0.2x30= 6 sqm.
- Teak shade prelaminated Particle board (three
- layer medium density) = 6.0 sqm.+
- Total = 6.6 sqm.
- For dressing and fixing particle board to
- skirting
- Painting with ready mixed priming coat at back
- Add wastage @ 10% = 0.6sqm.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7479 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 25 mm thickPrelaminated flat pressed three layer or graded wood particle board with one side decorative and other side balancing lamination, (medium density) Grade I, Type II conforming and marked to IS : 12823 (exterior grade) 25 mm thickMaterial | sqm | 6.6 | 901.00 | 5,946.60 |
| 9977 | Carriage of particle boardMaterial | L.S. | 8.11 | 2.27 | 18.41 |
| 7048 | Rawl plug 50 mm (designation 10 no.)Rawl plug 50 mm (designation 10)Material | each | 102 | 24.00 | 2,448.00 |
| 9999 | Labour for drilling holesMaterial | L.S. | 130 | 2.27 | 295.10 |
| 0112 | Carpenter 2nd classLabour | day | 0.77 | 816.00 | 628.32 |
| 0114 | BeldarLabour | day | 0.86 | 736.00 | 632.96 |
| 9999 | Sundries (Screws, sand paper)Material | L.S. | 53.82 | 2.27 | 122.17 |
| Rate as per item no 13.85.1 of SH : FinishingRate as per item 13.85.1Sub-analysis | sqm | 6 | 70.35 | 422.10 |
- TOTAL
- 10,513.66
- Add 1 % Water charges on “W-A”
- 100.92
- TOTAL
- 10,614.58
- Add GST on “X-A” (multiplying factor 0.2127)
- 2,167.94
- TOTAL
- 12,782.52
- Add 15% CPOH on “Y-A”
- 1,854.06
- TOTAL
- 14,636.58
- Add Cess @ 1% on “Z-A”
- 142.14
- Cost of 6 sqm.
- 14,778.72
- Cost of 1 sqm.
- 2,463.12
- Say
- 2,463.10
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 429. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works