Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete
- Item number
- 8.26.1
- Analysis basis
- 10 sqm
- Priced inputs
- 7
- Derived rate
- ₹1,430.20/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 8.26.1 (Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 12 mm thick) is derived from 7 priced inputs for 10 sqm and works out to ₹1,430.20 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Particle board (three layer medium density)
- 12mm thick = 10 sqm.
- Total = 11 sqm.
- Priming coat
- Add wastage @ 10% = 1 sqm.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 7477 | MAT | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thickPrelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade-I, Type II conforming to IS : 12823 (exterior grade) 12 mm thick | sqm | 11 | 550.00 | 6,050.00 |
| 9977 | MAT | Carriage of particle board | L.S. | 13.52 | 2.27 | 30.69 |
| 9999 | MAT | Sundries and screws | L.S. | 26.91 | 2.27 | 61.09 |
| SUB | Rate as per item no 13.85.1 of SH : FinishingRate as per item 13.85.1 | sqm | 10 | 70.35 | 703.50 | |
| 0112 | LAB | Carpenter 2nd class | day | 1.28 | 816.00 | 1,044.48 |
| 0114 | LAB | Beldar | day | 1.43 | 736.00 | 1,052.48 |
| 7048 | MAT | Rawl plug 50 mm (designation 10 no.)Rawl plug 50 mm (designation 10) | each | 55 | 24.00 | 1,320.00 |
- TOTAL
- 10,262.24
- Add 1 % Water charges on “W-A”
- +95.59
- TOTAL
- 10,357.83
- Add GST on “X-A” (multiplying factor 0.2127)
- +2,053.48
- TOTAL
- 12,411.31
- Add 15% CPOH on “Y-A”
- +1,756.17
- TOTAL
- 14,167.48
- Add Cess @ 1% on “Z-A”
- +134.64
- Cost of 10 sqm.
- 14,302.12
- Cost of 1 sqm.
- 1,430.21
- SAY
- ₹1,430.20
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 424
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 424. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.