CPWD Analysis of Rates · Aluminium Work
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge
Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)
- Item number
- 21.7.2
- Analysis basis
- Details of cost for 7.00 kg
- Priced inputs
- 9
- Derived rate
- ₹716.40 / kg
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.7.2 — Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) — is derived from 9 priced inputs for 7.00 kg and works out to ₹716.40 per kg after water charges, GST, CPOH and cess. The full build-up is below.
- Anodised aluminium sheet 2.5 mm thick, 170
- mm wide
- 5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/sqm =
- 7.00 kg
- Total = 7.35 kg
- Add 5% wastage = 0.35 kg
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 2704 | Aluminium Strip 40 mm wide and 2 mm thickMaterial | kilogram | 7.35 | 243.00 | 1,786.05 |
| 7392 | Powder coating 50 microns on aluminium sectionsMaterial | kilogram | 7.35 | 66.00 | 485.10 |
| 7347 | Cadmium plated full threaded steel screws (30x4 mm dia.)Cadmium plated full threaded steel screws (30x4 mm dia)Material | 100 Nos | 0.3 | 29.00 | 8.70 |
| 7348 | Aluminium washer 2 mm thick 15 mm diaMaterial | 100 Nos | 0.3 | 11.00 | 3.30 |
| 8776 | Stainless steel dash fastener of 8 mm dia and 75 mm long boltMaterial | each | 30 | 19.00 | 570.00 |
| 9977 | Carriage of materialsMaterial | L.S. | 6.5 | 2.27 | 14.76 |
| 0112 | Carpenter 2nd classLabour | day | 0.392 | 816.00 | 319.87 |
| 0114 | BeldarLabour | day | 0.392 | 736.00 | 288.51 |
| 9999 | Sundries including machine workMaterial | L.S. | 21.45 | 2.27 | 48.69 |
- TOTAL
- 3,524.98
- Add 1 % Water charges on “W”
- 35.25
- TOTAL
- 3,560.23
- Add GST on “X” (multiplying factor 0.2127)
- 757.26
- TOTAL
- 4,317.49
- Add 15% CPOH on “Y”
- 647.62
- TOTAL
- 4,965.11
- Add Cess @ 1% on “Z”
- 49.65
- Cost for 7.00 kg
- 5,014.76
- Cost for 1 kg
- 716.39
- Say
- 716.40
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1829. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works