Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge
- Item number
- 21.7.1
- Analysis basis
- 7.00 kg
- Priced inputs
- 9
- Derived rate
- ₹680.55/ KG
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.7.1 (Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)) is derived from 9 priced inputs for 7.00 kg and works out to ₹680.55 per kg after water charges, GST, CPOH and cess. The full build-up is below.
- Anodised aluminium sheet 2.5 mm thick, 170
- mm wide
- 5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/
- sqm = 7.00 kg
- Total = 7.35 kg
- Add 5% wastage = 0.35 kg
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 2704 | MAT | Aluminium Strip 40 mm wide and 2 mm thick | kilogram | 7.35 | 243.00 | 1,786.05 |
| 7389 | MAT | Anodising 15 microns on aluminium sections | kilogram | 7.35 | 42.00 | 308.70 |
| 7347 | MAT | Cadmium plated full threaded steel screws (30x4 mm dia.)Cadmium plated full threaded steel screws (30x4 mm dia) | 100 Nos | 0.3 | 29.00 | 8.70 |
| 7348 | MAT | Aluminium washer 2 mm thick 15 mm dia | 100 Nos | 0.3 | 11.00 | 3.30 |
| 8776 | MAT | Stainless steel dash fastener of 8 mm dia and 75 mm long bolt | each | 30 | 19.00 | 570.00 |
| 9977 | MAT | Carriage of materials | L.S. | 6.5 | 2.27 | 14.76 |
| 0112 | LAB | Carpenter 2nd class | day | 0.392 | 816.00 | 319.87 |
| 0114 | LAB | Beldar | day | 0.392 | 736.00 | 288.51 |
| 9999 | MAT | Sundries including machine work | L.S. | 21.45 | 2.27 | 48.69 |
- TOTAL
- 3,348.58
- Add 1 % Water charges on “W”
- +33.49
- TOTAL
- 3,382.07
- Add GST on “X” (multiplying factor 0.2127)
- +719.37
- TOTAL
- 4,101.44
- Add 15% CPOH on “Y”
- +615.22
- TOTAL
- 4,716.66
- Add Cess @ 1% on “Z”
- +47.17
- Cost for 7.00 kg
- 4,763.83
- Cost for 1 kg
- 680.55
- SAY
- ₹680.55
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1828
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1828. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.