CPWD Analysis of Rates · Aluminium Work
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
- Item number
- 21.2.1
- Analysis basis
- Details of cost for 7 sqm
- Priced inputs
- 5
- Derived rate
- ₹1,139.30 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.2.1 — Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side — is derived from 5 priced inputs for 7 sqm and works out to ₹1,139.30 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- 12 mm thick particle board = 7.00 sqm
- Total = 7.35 sqm
- Add 5% wastage = 0.35 sqm
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7477 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade) 12 mm thickPrelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade-I, Type II conforming to IS : 12823 (exterior grade) 12 mm thickMaterial | sqm | 7.35 | 550.00 | 4,042.50 |
| 9977 | Carriage of particle boardMaterial | L.S. | 13.65 | 2.27 | 30.99 |
| 9999 | Sundries & screws etc.Material | L.S. | 27.3 | 2.27 | 61.97 |
| 0112 | Carpenter 2nd classLabour | day | 0.9 | 816.00 | 734.40 |
| 0114 | BeldarLabour | day | 1 | 736.00 | 736.00 |
- TOTAL
- 5,605.86
- Add 1 % Water charges on “W”
- 56.06
- TOTAL
- 5,661.92
- Add GST on “X” (multiplying factor 0.2127)
- 1,204.29
- TOTAL
- 6,866.21
- Add 15% CPOH on “Y”
- 1,029.93
- TOTAL
- 7,896.14
- Add Cess @ 1% on “Z”
- 78.96
- Cost for 7 sqm
- 7,975.10
- Cost for 1 sqm
- 1,139.30
- Say
- 1,139.30
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1822. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works