Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
- Item number
- 21.1.2.3
- Analysis basis
- 20.62 kg
- Priced inputs
- 13
- Derived rate
- ₹643.45/ KG
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.1.2.3 (Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)) is derived from 13 priced inputs for 20.62 kg and works out to ₹643.45 per kg after water charges, GST, CPOH and cess. The full build-up is below.
- (i) Hanging style (Jindal section no 4524)
- 1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
- (ii) Meeting style (Jindal section no 4526)
- 1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
- (iii) Top & bottom rail (Jindal section no 4510)
- 2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
- (iv) Lock rail (Jindal section no 4524)
- 1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
- (v) Glazing plate (Jindal section no 440) on one
- side of lock rail
- 1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
- (vi) Aluminium snap beading (Jindal
- section no 4497) on both side
- 2x2 (0.75+1.26) = 8.04 m
- 2x2 (0.75+0.81) = 6.24 m
- = 14.28 m @ 0.176 kg/m = 2.51 kg
- (vii) Aluminium angle cleat 38x38x4.8 mm
- 35 mm long
- 3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
- Sub total = 20.62 kg
- Total = 21.65 kg
- (viii)
- (ix) C.P. brass /stainless steel screws 20 mm
- For cleat 12x4 = 48
- For Hinges 4x8 = 32
- For glazing plate @ 15 cm centre to centre in 75
- cm length 2x6 = 12
- Total = 92 Nos
- (x)
- (xi)
- (xii) Neoprene/ EPDM rubber gasket in groove
- of meeting style
- For fabrication
- For fixing the shutter including hinges :
- Add 5% wastage = 1.03 kg
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 7306 | MAT | Aluminium T or L sections | kilogram | 21.65 | 198.00 | 4,286.70 |
| 0689 | MAT | Anodised Aluminium butt hinges 100x75x4 mm | 10 Nos | 0.4 | 410.00 | 164.00 |
| 0589 | MAT | Chromium plated Brass screws 20 mm | 100 Nos | 0.92 | 152.00 | 139.84 |
| 7393 | MAT | Polyester powder coating 50 microns on aluminium sections | kilogram | 21.65 | 72.00 | 1,558.80 |
| 9977 | MAT | Carriage of material | L.S. | 31.2 | 2.27 | 70.82 |
| 7390 | MAT | Neoprene/EPDM rubber gasketEPDM Gasket for uPVC window/door | metre | 2.35 | 16.00 | 37.60 |
| 0116 | LAB | Fitter (grade 1) | day | 1 | 897.00 | 897.00 |
| 0139 | LAB | Skilled Beldar (for floor rubbing etc.) | day | 1 | 816.00 | 816.00 |
| 0114 | LAB | Beldar | day | 0.5 | 736.00 | 368.00 |
| 0100 | LAB | Bandhani | day | 0.4 | 816.00 | 326.40 |
| 0111 | LAB | Carpenter 1st class | day | 0.2 | 897.00 | 179.40 |
| OTHER | 114 Beldar | day | 0.5 | 736.00 | 368.00 | |
| 9999 | MAT | Labour for making provision for fittings and carriage of screws etc. including sundries | L.S. | 50 | 2.27 | 113.50 |
- TOTAL
- 9,326.06
- Add 1 % Water charges on “W”
- +93.26
- TOTAL
- 9,419.32
- Add GST on “X” (multiplying factor 0.2127)
- +2,003.49
- TOTAL
- 11,422.81
- Add 15% CPOH on “Y”
- +1,713.42
- TOTAL
- 13,136.23
- Add Cess @ 1% on “Z”
- +131.36
- Cost for 20.62 kg
- 13,267.59
- Cost for 1 kg
- 643.43
- SAY
- ₹643.45
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1820
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1820. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.