CPWD Analysis of Rates · Aluminium Work
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately)
- Item number
- 21.14
- Analysis basis
- Details of cost for 4.082kg
- Priced inputs
- 9
- Derived rate
- ₹402.80
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.14 — Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) — is derived from 9 priced inputs and works out to ₹402.80 after water charges, GST, CPOH and cess. The full build-up is below.
- Aluminium Section
- (i) External member of the frame (Jindal section
- no TU/ 3644)
- V = 2x2.00 = 4.00 m
- H = 2x1.20 = 2.40 m
- Total= 6.40 m @ 0.607 kg/m = 3.885kg
- Angle cleat 38x38x4.8 mm 50 mm long
- 4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
- sub total = 4.082kg.
- Total = 4.286kg
- For fabrication of frame
- Add 5% wastage = 0.204kg
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7306 | Aluminium T or L sectionsMaterial | kilogram | 4.286 | 198.00 | 848.63 |
| 0589 | Chromium plated Brass screws 20 mmMaterial | 100 Nos | 0.08 | 152.00 | 12.16 |
| 7389 | Anodising 15 microns on aluminium sectionsMaterial | kilogram | 4.286 | 42.00 | 180.01 |
| 9977 | Carriage of materialMaterial | L.S. | 5.2 | 2.27 | 11.80 |
| 0116 | Fitter (grade 1)Labour | day | 0.04 | 897.00 | 35.88 |
| 0139 | Skilled Beldar (for floor rubbing etc.)Labour | day | 0.04 | 816.00 | 32.64 |
| 0114 | BeldarLabour | day | 0.02 | 736.00 | 14.72 |
| 0100 | BandhaniLabour | day | 0.01 | 816.00 | 8.16 |
| 9999 | Labour for drilling holes, hire charges of drill, electricity charges, carriage of dash hold fastners & sundriesMaterial | L.S. | 5.2 | 2.27 | 11.80 |
- TOTAL
- 1,155.80
- Add 1 % Water charges on “W”
- 11.56
- TOTAL
- 1,167.36
- Add GST on “X” (multiplying factor 0.2127)
- 248.30
- TOTAL
- 1,415.66
- Add 15% CPOH on “Y”
- 212.35
- TOTAL
- 1,628.01
- Add Cess @ 1% on “Z”
- 16.28
- Cost for 4.082 kg
- 1,644.29
- Cost for 1 kg
- 402.81
- Say
- 402.80
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1835. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works