Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
- Item number
- 21.1.2.1
- Analysis basis
- 20.62 kg
- Priced inputs
- 13
- Derived rate
- ₹598.60/ KG
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.1.2.1 (Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)) is derived from 13 priced inputs for 20.62 kg and works out to ₹598.60 per kg after water charges, GST, CPOH and cess. The full build-up is below.
- (i) Hanging style (Jindal section no 4524)
- 1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
- (ii) Meeting style (Jindal section no 4526)
- 1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
- (iii) Top & bottom rail (Jindal section no 4510)
- 2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
- (iv) Lock rail (Jindal section no 4524)
- 1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
- (v) Glazing plate (Jindal section no 440) on one
- side of lock rail
- 1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
- (vi) Aluminium snap beading (Jindal section no
- 4497) on both side
- 2x2 (0.75+1.26) = 8.04 m
- 2x2 (0.75+0.81) = 6.24 m
- = 14.28 m @ 0.176 kg/m = 2.51 kg
- (vii) Aluminium angle cleat 38x38x4.8 mm 35
- mm long
- 3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
- Sub total = 20.62 kg
- Total = 21.65 kg
- (viii)
- (ix) C.P. brass /stainless steel screws 20 mm
- For cleat 12x4 = 48
- For Hinges 4x8 = 32
- For glazing plate @ 15 cm centre to centre in 75
- cm length 2x6 = 12
- Total = 92 Nos
- (x)
- (xi)
- (xii) Neoprene/ EPDM gasket in groove of meeting style
- For fabrication
- For fixing the shutter including hinges :
- Add 5% wastage = 1.03 kg
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 7306 | MAT | Aluminium T or L sections | kilogram | 21.65 | 198.00 | 4,286.70 |
| 0689 | MAT | Anodised Aluminium butt hinges 100x75x4 mm | 10 Nos | 0.4 | 410.00 | 164.00 |
| 0589 | MAT | Chromium plated Brass screws 20 mm | 100 Nos | 0.92 | 152.00 | 139.84 |
| 7389 | MAT | Anodising 15 microns on aluminium sections | kilogram | 21.65 | 42.00 | 909.30 |
| 9977 | MAT | Carriage of material | L.S. | 31.2 | 2.27 | 70.82 |
| 7390 | MAT | Neoprene/EPDM rubber gasketEPDM Gasket for uPVC window/door | metre | 2.35 | 16.00 | 37.60 |
| 0116 | LAB | Fitter (grade 1) | day | 1 | 897.00 | 897.00 |
| 0139 | LAB | Skilled Beldar (for floor rubbing etc.) | day | 1 | 816.00 | 816.00 |
| 0114 | LAB | Beldar | day | 0.5 | 736.00 | 368.00 |
| 0100 | LAB | Bandhani | day | 0.4 | 816.00 | 326.40 |
| 0111 | LAB | Carpenter 1st class | day | 0.2 | 897.00 | 179.40 |
| 0114 | LAB | Beldar | day | 0.5 | 736.00 | 368.00 |
| 9999 | MAT | Labour for making provision for fittings and carriage of screws etc. including sundries | L.S. | 50 | 2.27 | 113.50 |
- TOTAL
- 8,676.56
- Add 1 % Water charges on “W”
- +86.77
- TOTAL
- 8,763.33
- Add GST on “X” (multiplying factor 0.2127)
- +1,863.96
- TOTAL
- 10,627.29
- Add 15% CPOH on “Y”
- +1,594.09
- TOTAL
- 12,221.38
- Add Cess @ 1% on “Z”
- +122.21
- Cost for 20.62 kg
- 12,343.59
- Cost for 1 kg
- 598.62
- SAY
- ₹598.60
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1818
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1818. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.