Skip to main content

CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

75x63x4 mm

Item number
9.95.6
Analysis basis
Details of cost for 10 nos.
Priced inputs
5
Derived rate
87.90 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.95.6 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 75x63x4 mm — is derived from 5 priced inputs for 10 nos and works out to ₹87.90 per no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
0692Anodised Aluminium butt hinges 75x63x4 mmMaterial10 Nos1285.00285.00
0587Chromium plated Brass screws 30 mmMaterial100 Nos0.6228.00136.80
9977Carriage of materialsMaterialL.S.1.822.274.13
0111Carpenter 1st classLabourday0.14897.00125.58
0114BeldarLabourday0.09736.0066.24
TOTAL
617.75
Add 1 % Water charges on “W”
6.18
TOTAL
623.93
Add GST on “X” (multiplying factor 0.2127)
132.71
TOTAL
756.64
Add 15% CPOH on “Y”
113.50
TOTAL
870.14
Add Cess @ 1% on “Z”
8.70
Cost of 10 nos.
878.84
Cost of 1 no.
87.88
Say
87.90

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 563. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works