CPWD Analysis of Rates · Wood and PVC Work
Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge
300 x 19 x 1.9 mm
- Item number
- 9.148.3
- Analysis basis
- Details of cost for 10 Nos
- Priced inputs
- 5
- Derived rate
- ₹459.55 / No
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.148.3 — Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge 300 x 19 x 1.9 mm — is derived from 5 priced inputs for 10 Nos and works out to ₹459.55 per no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 8757 | Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for uPVC windowsStainless steel friction hinges (SS-304 grade) size 300 x 19 x 1.9 mm for uPVC windowMaterial | each | 10 | 299.00 | 2,990.00 |
| 8647 | Stainless steel screws 30mm x4mm.Stainless steel screws 30 mm x4 mmMaterial | 100 Nos | 0.4 | 42.00 | 16.80 |
| 9977 | Carriage of materialsMaterial | L.S. | 2.73 | 2.27 | 6.20 |
| 0112 | Carpenter 2nd classLabour | day | 0.14 | 816.00 | 114.24 |
| 0114 | BeldarLabour | day | 0.14 | 736.00 | 103.04 |
- TOTAL
- 3,230.28
- Add 1 % Water charges on “W”
- 32.30
- TOTAL
- 3,262.58
- Add GST on “X” (multiplying factor 0.2127)
- 693.95
- TOTAL
- 3,956.53
- Add 15% CPOH on “Y”
- 593.48
- TOTAL
- 4,550.01
- Add Cess @ 1% on “Z”
- 45.50
- Cost of 10 Nos
- 4,595.51
- Cost of 1 No
- 459.55
- Say
- 459.55
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 689. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works