Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
- Item number
- 9.129
- Analysis basis
- one shutter
- Priced inputs
- 8
- Derived rate
- ₹2,307.35/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.129 (Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge) is derived from 8 priced inputs for one shutter and works out to ₹2,307.35 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- 2.20sqm.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 7272 | MAT | 25 mm thick melamine faced prelaminated three layer particle board25 mm thick melamine faced prelaminated flat pressed three layer particle board | sqm | 2.2 | 970.00 | 2,134.00 |
| 9977 | MAT | CARRIAGE | L.S. | 29.64 | 2.27 | 67.28 |
| 8678 | MAT | 1mm thick 35mm wide bright finished stainless steel piano hinges1 mm thick 35 mm wide bright finished stainless steel piano hinges | metre | 4.4 | 52.00 | 228.80 |
| 0685 | MAT | Oxidised mild steel screws 25 mm | 100 Nos | 1.25 | 39.00 | 48.75 |
| 0111 | LAB | Carpenter 1st class | day | 0.5 | 897.00 | 448.50 |
| 0114 | LAB | Beldar | day | 0.5 | 736.00 | 368.00 |
| 0130 | LAB | Mistry | day | 0.07 | 897.00 | 62.79 |
| 7271 | MAT | IInd class teak wood lipping 25 mm wide x 12 mm thickSecond class teak wood lipping 25 mm wide x 12 mm thick | metre | 7 | 30.00 | 210.00 |
- TOTAL
- 3,568.12
- Add 1 % Water charges on “W”
- +35.68
- TOTAL
- 3,603.80
- Add GST on “X” (multiplying factor 0.2127)
- +766.53
- TOTAL
- 4,370.33
- Add 15% CPOH on “Y”
- +655.55
- TOTAL
- 5,025.88
- Add Cess @ 1% on “Z”
- +50.26
- Cost for 2.20sqm.
- 5,076.14
- Cost of 1 sqm
- 2,307.34
- SAY
- ₹2,307.35
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 600
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 600. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.