CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing PTMT Butt hinges with necessary screws etc. complete

75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms

CPWD DAR 2023›Wood and PVC Work

Item number: 9.107.1
Analysis basis: Details of cost for ten Nos.
Priced inputs: 5
Derived rate: ₹75.90 / No

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.107.1 — Providing and fixing PTMT Butt hinges with necessary screws etc. complete 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms — is derived from 5 priced inputs for ten Nos and works out to ₹75.90 per no after water charges, GST, CPOH and cess. The full build-up is below.

Code	Input	Unit	Quantity	Rate (INR)	Amount (INR)
7514	PTMT butt hinges 75x60x10mmPTMT butt hinges 75x60x10 mmMaterial	each	10	32.00	320.00
0638	Bright finished or black enamelled mild steel screws 30 mmBright finished or black enameled mild steel screws 30 mmMaterial	100 Nos	0.6	48.00	28.80
9977	Carriage of materialsMaterial	L.S.	1.82	2.27	4.13
0112	Carpenter 2nd classLabour	day	0.14	816.00	114.24
0114	BeldarLabour	day	0.09	736.00	66.24

TOTAL: 533.41
Add 1 % Water charges on “W”: 5.33
TOTAL: 538.74
Add GST on “X” (multiplying factor 0.2127): 114.59
TOTAL: 653.33
Add 15% CPOH on “Y”: 98.00
TOTAL: 751.33
Add Cess @ 1% on “Z”: 7.51
Cost of 10 Nos: 758.84
Cost of 1 No: 75.88
Say: 75.90

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 581. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works