CPWD Analysis of Rates · Water Supply
Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall
22.22 mm outer dia Pipe
- Item number
- 18.85.2
- Analysis basis
- Details of cost for 10 metre
- Priced inputs
- 5
- Derived rate
- ₹599.50 / metre
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 18.85.2 — Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Exposed on wall 22.22 mm outer dia Pipe — is derived from 5 priced inputs for 10 metre and works out to ₹599.50 per metre after water charges, GST, CPOH and cess. The full build-up is below.
- 3 xP/ 100
- 2xP/ 100
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 8780 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 22.22 mm outer diaMaterial | metre | 10 | 275.00 | 2,750.00 |
| 9999 | Cement, sand and gritMaterial | L.S. | 2.73 | 2.27 | 6.20 |
| 0116 | Fitter (grade 1)Labour | day | 0.33 | 897.00 | 296.01 |
| 0117 | Assistant Fitter or 2nd class FitterLabour | day | 0.66 | 816.00 | 538.56 |
| 0114 | BeldarLabour | day | 0.66 | 736.00 | 485.76 |
- Add 3% for pipe inserted into fitting and wastage etc. on P
- 82.50
- Add 2% for special T&P and sundries etc. on P
- 55.00
- TOTAL
- 4,214.03
- Add 1 % Water charges on “W”
- 42.14
- TOTAL
- 4,256.17
- Add GST on “X” (multiplying factor 0.2127)
- 905.29
- TOTAL
- 5,161.46
- Add 15% CPOH on “Y”
- 774.22
- TOTAL
- 5,935.68
- Add Cess @ 1% on “Z”
- 59.36
- Cost of 10 metre
- 5,995.04
- Cost of 1 metre
- 599.50
- Say
- 599.50
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1591. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works