CPWD Analysis of Rates · Water Supply
Labour for cutting C.I. pipe with steel saw
300 mm diameter C.I. pipe
- Item number
- 18.83.7
- Analysis basis
- Detail of cost for one cut.
- Priced inputs
- 3
- Derived rate
- ₹728.85 / one cut
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 18.83.7 — Labour for cutting C.I. pipe with steel saw 300 mm diameter C.I. pipe — is derived from 3 priced inputs for one cut and works out to ₹728.85 per one cut after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 0116 | Fitter (grade 1)Labour | day | 0.3 | 897.00 | 269.10 |
| 0114 | BeldarLabour | day | 0.3 | 736.00 | 220.80 |
| 9999 | SundriesMaterial | L.S. | 9.88 | 2.27 | 22.43 |
- TOTAL
- 512.33
- Add 1 % Water charges on “W”
- 5.12
- TOTAL
- 517.45
- Add GST on “X” (multiplying factor 0.2127)
- 110.06
- TOTAL
- 627.51
- Add 15% CPOH on “Y”
- 94.13
- TOTAL
- 721.64
- Add Cess @ 1% on “Z”
- 7.22
- Cost of each cut
- 728.86
- Say
- 728.85
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1588. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works