Skip to main content

CPWD Analysis of Rates · Water Proofing

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage

For vertical surface two coats @ 0.70 kg per sqm per coat

Item number
22.23.1
Analysis basis
Details of cost for 1 sqm
Priced inputs
4
Derived rate
472.90 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 22.23.1 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage For vertical surface two coats @ 0.70 kg per sqm per coat — is derived from 4 priced inputs for 1 sqm and works out to ₹472.90 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

  • MATERIAL :
  • (2 x .70kg / sq.mtr. = 1.40kg)
CodeInputUnitQuantityRate (INR)Amount (INR)
0351Integral crystalline slurryMaterialkg1.4214.00299.60
9999For application of waterproofing materialMaterialL.S.11.552.2726.22
9999SundriesMaterialL.S.1.152.272.61
9999Carriage of material and tools cost etc..MaterialL.S.1.752.273.97
TOTAL
332.40
Add 1 % Water charges on “W”
3.32
TOTAL
335.72
Add GST on “X” (multiplying factor 0.2127)
71.41
TOTAL
407.13
Add 15% CPOH on “Y”
61.07
TOTAL
468.20
Add Cess @ 1% on “Z”
4.68
Cost for 1.00 sqm
472.88
Say
472.90

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1859. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works