Skip to main content

CPWD Analysis of Rates · Stone Work

Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : White sand stone

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Item number
7.28.2.1
Analysis basis
Details of cost for a chajja 2.00 sqm.
Priced inputs
12
Derived rate
2,932.60 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 7.28.2.1 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : White sand stone : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 — is derived from 12 priced inputs for a chajja and works out to ₹2,932.60 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

  • (finished work)
  • Chisel dressed 80cm sloping length plus
  • 20cm bearing Area = 2.5x1.00=2.50sqm
  • Labour for dressing:
  • Anchoring steel bars 12mm dia. 45cm
  • long, 5 Nos. @ 0.80kg/m = 0.02q
  • Mortar for pointing 1:2 (1 Cement : 2
  • Stone dust)
  • Brick cover support 4 courses with bricks
  • of class designation 75
  • 4x7+5+5=38cm girth 2.5m length
  • =38cmx2.5m=95cm
  • Brick work in triangular gap above cover
  • with bricks of class designation 5 in cement mortar 1:4
  • 1/2x2.5x0.2x0.07=0.018cum.
CodeInputUnitQuantityRate (INR)Amount (INR)
1165White sand stone slab 40 mm thick (undressed)White sand stone slab 40 mm thick (un-dressed)Materialsqm2.75370.001,017.50
0125Mason (for plain stone work) 2nd class)Mason (for plain stone work) 2nd classLabourday0.5816.00408.00
1002Mild steel round bar 12 mm dia and belowMaterialquintal0.025,550.00111.00
9999Cutting threads and cost of nuts, washers, etcMaterialL.S.67.342.27152.86
Rate as per Item Number 3.12 of SH: MortarsRate as per item 3.12Sub-analysiscum0.0095,252.0047.27
9999PigmentMaterialL.S.6.242.2714.16
9999Extra cost of white cementMaterialL.S.26.912.2761.09
0125Mason (for plain stone work) 2nd class)Mason (for plain stone work) 2nd classLabourday1816.00816.00
0114BeldarLabourday1.5736.001,104.00
9999Scaffolding and sundries etc.MaterialL.S.16.122.2736.59
9999Cost for Brick cover support .MaterialL.S.1042.27236.08
Rate as per item No 6.4.1 of SH :- Brick workRate as per item 6.4.1Sub-analysiscum0.0189,344.35168.20
TOTAL
4,172.75
Add 1 % Water charges on “W-A”
40.05
TOTAL
4,212.80
Add GST on “X-A” (multiplying factor 0.2127)
860.29
TOTAL
5,073.09
Add 15% CPOH on “Y-A”
735.73
TOTAL
5,808.82
Add Cess @ 1% on “Z-A”
56.41
Cost of 2 sqm.
5,865.23
Cost of 1 sqm.
2,932.62
Say
2,932.60

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 371. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works