Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C
- Item number
- 10.15.1
- Analysis basis
- Details of cost for 7.13Kg.
- Priced inputs
- 12
- Derived rate
- ₹195.20
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 10.15.1 (Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)) is derived from 12 priced inputs and works out to ₹195.20 after water charges, GST, CPOH and cess. The full build-up is below.
- L- section - 32x22x28mm 1.60mm thick
- 2.00+2.00+1.00 = 5.00 m
- Width of MS sheet = 32+24.80+22+
- 24.80+10mm = 113.60mm = 0.1136 m
- Area of MS sheet = 0.1136x5.00x0.0016 =
- 0.0009088 sqm
- Weight of Sheet = 0.0009088x7850 =7.134
- kg
- Total = 7.491 kg Say 7.49 kg
- M.S. bars 10mm = 1x1m = 1 metre
- 1 metre @ 0.60kg/m = 0.60Kg.
- Total = 0.63 Kg. Say = 0.006 qunital
- M.S. flat 15x3mm = 6x10cm = 0.60 metre
- 0.6 metre @ 0.35kg/m = 0.21Kg
- Total = 0.22 kg = 0.002q
- Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum
- Add wastage @ 5% = 0.357Kg.
- Add wastage @ 5% = 0.03Kg.
- Add wastage @ 5% = 0.01 Kg.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 4011 | MAT | Mild steel tubes electric resistant or induction butt welded | gram | 7.49 | 72.00 | 539.28 |
| 1002 | MAT | Mild steel round bar 12 mm dia and below | quintal | 0.006 | 5,550.00 | 33.30 |
| 1008 | MAT | Flats upto 10 mm in thicknessFlats up to 10 mm in thickness | quintal | 0.002 | 5,450.00 | 10.90 |
| SUB | Rate as per item no 4.2.5 of SH : Concrete workRate as per item 4.2.5 | cum | 0.009 | 9,311.40 | 83.80 | |
| 0595 | MAT | Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mmBright finished or black enameled ISI marked IS:1341 mild steel pressed butt hinges 100x58x 1.90 mm | 10 Nos | 0.6 | 80.00 | 48.00 |
| 9999 | MAT | For screws and nuts and bolts | L.S. | 35.88 | 2.27 | 81.45 |
| 9999 | MAT | For applying steel primer | L.S. | 17.94 | 2.27 | 40.72 |
| 9977 | MAT | Carriage of material | L.S. | 5.33 | 2.27 | 12.10 |
| 0103 | LAB | Blacksmith 2nd class | day | 0.04 | 816.00 | 32.64 |
| 0116 | LAB | Fitter (grade 1) | day | 0.06 | 897.00 | 53.82 |
| 0114 | LAB | Beldar | day | 0.08 | 736.00 | 58.88 |
| 9999 | MAT | Sundries | L.S. | 3.64 | 2.27 | 8.26 |
- TOTAL
- 1,003.15
- Add 1 % Water charges on “W-A”
- +9.19
- TOTAL
- 1,012.34
- Add GST on “X-A” (multiplying factor 0.2127)
- +197.50
- TOTAL
- 1,209.84
- Add 15% CPOH on “Y-A”
- +168.91
- TOTAL
- 1,378.75
- Add Cess @ 1% on “Z-A”
- +12.95
- Cost for 7.13Kg.
- 1,391.70
- Cost for 1 Kg.
- 195.19
- SAY
- ₹195.20
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 734
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 734. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.