CPWD Analysis of Rates · Sanitary Installations
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work
100 mm diameter pipe
- Item number
- 17.65.1
- Analysis basis
- Details of cost for 10 metres
- Priced inputs
- 3
- Derived rate
- ₹82.80 / metre
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.65.1 — Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe — is derived from 3 priced inputs for 10 metres and works out to ₹82.80 per metre after water charges, GST, CPOH and cess. The full build-up is below.
- Perimeter = 3.14x110 mm =345.71
- Area 10x0.3457 = 3.46 sqm
- Priming coat
- Painting two coats with paint of any colour
- such as chocolatem grey or buff etc.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| Rate as per item no 13.50.3 of SH : FinishingRate as per item 13.50.3Sub-analysis | sqm | 3.46 | 67.40 | 233.20 | |
| Rate as per item no 13.61.1 of SH : FinishingRate as per item 13.61.1Sub-analysis | sqm | 3.46 | 155.90 | 539.41 | |
| 9999 | Add for delayMaterial | L.S. | 17.16 | 2.27 | 38.95 |
- TOTAL
- 811.56
- Add 1 % Water charges on “W-A”
- 0.39
- TOTAL
- 811.95
- Add GST on “X-A” (multiplying factor 0.2127)
- 8.37
- TOTAL
- 820.32
- Add 15% CPOH on “Y-A”
- 7.16
- TOTAL
- 827.48
- Add Cess @ 1% on “Z-A”
- 0.55
- Cost of 10 metres
- 828.03
- Cost of 1 metre
- 82.80
- Say
- 82.80
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1378. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works