Skip to main content

CPWD Analysis of Rates · Sanitary Installations

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Item number
17.38.1.3
Analysis basis
Detail of cost for one no.
Priced inputs
3
Derived rate
567.20 / one no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.38.1.3 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 — is derived from 3 priced inputs for one no and works out to ₹567.20 per one no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
7639Hubless centrifugally cast (spun) iron bend with access door - 100 mm dia as per IS IS:15905Hubless centrifugally cast (spun) iron bend with access door - 100 mm dia as per IS 15905Materialeach1348.00348.00
1374Rubber insertions for 100 mm dia pipe jointsMaterialeach120.0020.00
9977Carriage of materials and fixing chargesMaterialL.S.13.522.2730.69
TOTAL
398.69
Add 1 % Water charges on “W”
3.99
TOTAL
402.68
Add GST on “X” (multiplying factor 0.2127)
85.65
TOTAL
488.33
Add 15% CPOH on “Y”
73.25
TOTAL
561.58
Add Cess @ 1% on “Z”
5.62
Cost of each
567.20
Say
567.20

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1335. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works