Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia
- Item number
- 17.38.1.2
- Analysis basis
- one no
- Priced inputs
- 3
- Derived rate
- ₹705.20/ ONE NO
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 17.38.1.2 (Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia Sand cast iron S&S as per IS - 3989) is derived from 3 priced inputs for one no and works out to ₹705.20 per one no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 3624 | MAT | S.C.I. S&S bends with access door 100mm diaS.C.I. S&S bends with access door 100 mm dia | each | 1 | 445.00 | 445.00 |
| 1374 | MAT | Rubber insertions for 100 mm dia pipe joints | each | 1 | 20.00 | 20.00 |
| 9988 | MAT | Carriage of materials and fixing charges | L.S. | 13.52 | 2.27 | 30.69 |
- TOTAL
- 495.69
- Add 1 % Water charges on “W”
- +4.96
- TOTAL
- 500.65
- Add GST on “X” (multiplying factor 0.2127)
- +106.49
- TOTAL
- 607.14
- Add 15% CPOH on “Y”
- +91.07
- TOTAL
- 698.21
- Add Cess @ 1% on “Z”
- +6.98
- Cost of each
- 705.19
- SAY
- ₹705.20
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 1335
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1335. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.