Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture’s specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with
- Item number
- 12.59.1
- Analysis basis
- 10.8 m
- Priced inputs
- 19
- Derived rate
- ₹1,572.30/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.59.1 (Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture’s specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process) is derived from 19 priced inputs for 10.8 m and works out to ₹1,572.30 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- 103.68sqm
- MATERIALS:
- Area = 103.68 sq.m +
- 108.86 Sqm
- MATERIALS :
- LABOUR :
- Add. Wastage of5% = 5.18 Sq.m Total =
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 8699 | MAT | 8 mm thick tapered edge calcium silicate board | sqm | 108.86 | 297.00 | 32,331.42 |
| 7010 | MAT | G.I Ceiling Section (80 x26mm x26mm x10.5mm each lip x 0.55 mm)Galvanised Steel ceiling section (size 80x26x0.50 mm) | metre | 238.14 | 49.00 | 11,668.86 |
| 7011 | MAT | Galvanised Steel perimetre Channel (Size 20x27x30x0.50mm)Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) | metre | 41.84 | 24.00 | 1,004.16 |
| 7012 | MAT | Galvanised Steel intermediate Channel (Size 15x45x15x0.90mm)Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) | metre | 90.72 | 40.00 | 3,628.80 |
| 7013 | MAT | Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50mm)Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) | metre | 10.8 | 13.00 | 140.40 |
| 7014 | MAT | Galvanised Steel connecting clips (2.64mm dia and 230 mm long GI wire)Galvanised Steel connecting clips (2.64 mm dia and 230 mm long GI wire) | each | 189 | 4.00 | 756.00 |
| 1022 | MAT | Galvanised steel bolts & nuts 6 mm dia and 25 mmlong round head with slotsGalvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots | 10 Nos | 21.6 | 38.00 | 820.80 |
| 8617 | MAT | Soffit cleat (Size 27x37x25x1.60mm)Soffit cleat (Size 27x37x25x1.60 mm) | each | 72 | 6.00 | 432.00 |
| 7020 | MAT | All drive screws ( for gypsum board)All drive screws (for gypsum board) | 100 Nos | 10 | 63.00 | 630.00 |
| 7016 | MAT | Joint filler | kilogram | 22.81 | 25.00 | 570.25 |
| 7017 | MAT | Joint finisher | kilogram | 34.21 | 23.00 | 786.83 |
| 7388 | MAT | Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia boltDash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt | each | 72 | 10.00 | 720.00 |
| 7018 | MAT | Joint Tape roll (120mm Roll)Joint tape roll | roll | 1.27 | 95.00 | 120.65 |
| 7021 | MAT | Primer ( for gypsum board// calcium silicate board)Primer (for gypsum board) | litre | 18.66 | 75.00 | 1,399.50 |
| 9977 | MAT | Carriage | L.S. | 447.2 | 2.27 | 1,015.14 |
| 9999 | MAT | Sundries i.e rawl plug, scaffolding etc. | L.S. | 807.3 | 2.27 | 1,832.57 |
| 0112 | LAB | Carpenter 2nd class | day | 31.1 | 816.00 | 25,377.60 |
| 0114 | LAB | Beldar | day | 31.1 | 736.00 | 22,889.60 |
| 0131 | LAB | Painter | day | 10.37 | 816.00 | 8,461.92 |
- TOTAL
- 1,14,586.50
- Add 1 % Water charges on “W”
- +1,145.87
- TOTAL
- 1,15,732.37
- Add GST on “X” (multiplying factor 0.2127)
- +24,616.28
- TOTAL
- 1,40,348.65
- Add 15% CPOH on “Y”
- +21,052.30
- TOTAL
- 1,61,400.95
- Add Cess @ 1% on “Z”
- +1,614.01
- Cost of 103.68 sqm.
- 1,63,014.96
- Cost of 1 sqm.
- 1,572.29
- SAY
- ₹1,572.30
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 928
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 928. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.