Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with
- Item number
- 12.54.2
- Analysis basis
- 100 sqm
- Priced inputs
- 16
- Derived rate
- ₹2,354.65/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.54.2 (Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation) is derived from 16 priced inputs for 100 sqm and works out to ₹2,354.65 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Celling Area =100 sqm
- Total=105 sqm
- Including Wastage @ 10%
- Including Wastage @ 10%
- Including Wastage @ 10% on Grid for cut
- outs
- Add wastage @ 5% = 5 sqm.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| 8598 | MAT | GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size 600x600 mm and 0.5mm thickGI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size 600x600 mm and 0.5 mm thick | sqm | 105 | 882.00 | 92,610.00 |
| 8604 | MAT | Spring T-section 24x34x0.45 mm (3.00 meter long)Spring T-section 24x34x0.45 mm (3.00 metre long) | metre | 60 | 240.00 | 14,400.00 |
| 8605 | MAT | C Wall angle section 20x30x20x0.50 mm (3.00 meter long)C Wall angle section 20x30x20x0.50 mm (3.00 metre long) | metre | 27.7 | 115.00 | 3,185.50 |
| 8606 | MAT | Main C Carrier Size 10x38x10x0.70mm (3.00 meter long)Main C Carrier size 10x38x10x0.70 mm (3.00 metre long) | metre | 33 | 135.00 | 4,455.00 |
| 8607 | MAT | Spring T-connector | each | 44 | 6.00 | 264.00 |
| 8608 | MAT | C Carrier Connector | each | 44 | 13.00 | 572.00 |
| 8609 | MAT | C Suspension Clip | each | 88 | 11.00 | 968.00 |
| 8610 | MAT | Wire Coupling Clip | each | 333 | 11.00 | 3,663.00 |
| 8615 | MAT | Hanger rod 4 mm thick | each | 80 | 11.00 | 880.00 |
| 8616 | MAT | Adjustment clip 85x30x0.8mmAdjustment clip 85x30x0.8 mm | each | 80 | 7.00 | 560.00 |
| 8617 | MAT | Soffit cleat (Size 27x37x25x1.60mm)Soffit cleat (Size 27x37x25x1.60 mm) | each | 80 | 6.00 | 480.00 |
| 7388 | MAT | Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia boltDash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt | each | 80 | 10.00 | 800.00 |
| 9999 | MAT | Sundries i.e. scaffolding etc. | L.S. | 188 | 2.27 | 426.76 |
| 9977 | MAT | Carriage of materials etc. | L.S. | 90 | 2.27 | 204.30 |
| 0111 | LAB | Carpenter 1st class | day | 28 | 897.00 | 25,116.00 |
| 0114 | LAB | Beldar | day | 23 | 736.00 | 16,928.00 |
- TOTAL
- 1,65,512.56
- Add 1 % Water charges on “W”
- +1,655.13
- TOTAL
- 1,67,167.69
- Add GST on “X” (multiplying factor 0.2127)
- +35,556.57
- TOTAL
- 2,02,724.26
- Add 15% CPOH on “Y”
- +30,408.64
- TOTAL
- 2,33,132.90
- Add Cess @ 1% on “Z”
- +2,331.33
- Cost of 100 sqm.
- 2,35,464.23
- Cost of 1 sqm.
- 2,354.64
- SAY
- ₹2,354.65
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 923
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 923. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.