CPWD Analysis of Rates · Roofing
Extra for Circular cutting including wastages in ceiling with: Standard quality hard board sheet
4.5 mm thick
- Item number
- 12.27.5.2
- Analysis basis
- Details of cost for 15.71 metre
- Priced inputs
- 10
- Derived rate
- ₹485.70 / metre
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.27.5.2 — Extra for Circular cutting including wastages in ceiling with: Standard quality hard board sheet: 4.5 mm thick — is derived from 10 priced inputs for 15.71 metre and works out to ₹485.70 per metre after water charges, GST, CPOH and cess. The full build-up is below.
- 0.5 metre dia. each = 10x22/7x0.5=15.71m
- Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
- Wastage @ 10% = 0.19 sqm.
- Total = 2.15 sqm.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 0996 | Standard quality hard board sheet 4.5 mm thickMaterial | sqm | 2.15 | 225.00 | 483.75 |
| 9977 | CarriageMaterial | L.S. | 2.86 | 2.27 | 6.49 |
| 9999 | NailsMaterial | L.S. | 5.33 | 2.27 | 12.10 |
| 0111 | Carpenter 1st classLabour | day | 0.49 | 897.00 | 439.53 |
| 0114 | BeldarLabour | day | 0.39 | 736.00 | 287.04 |
| 9999 | ScaffoldingMaterial | L.S. | 6.11 | 2.27 | 13.87 |
| 9999 | SundriesMaterial | L.S. | 6.11 | 2.27 | 13.87 |
| 0111 | Carpenter 1st classLabour | day | 2.5 | 897.00 | 2,242.50 |
| 0114 | BeldarLabour | day | 2.5 | 736.00 | 1,840.00 |
| 9999 | ScaffoldingMaterial | L.S. | 10.79 | 2.27 | 24.49 |
- TOTAL
- 5,363.64
- Add 1 % Water charges on “W”
- 53.64
- TOTAL
- 5,417.28
- Add GST on “X” (multiplying factor 0.2127)
- 1,152.26
- TOTAL
- 6,569.54
- Add 15% CPOH on “Y”
- 985.43
- TOTAL
- 7,554.97
- Add Cess @ 1% on “Z”
- 75.55
- Cost of 15.71 metre
- 7,630.52
- Cost of 1.00 metre
- 485.71
- Say
- 485.70
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 887. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works