CPWD Analysis of Rates · Roofing
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
1.00 mm thick with zinc coating not less than 275 gm/m²
- Item number
- 12.1.1
- Analysis basis
- Details of cost for a roof with each sloping
- Priced inputs
- 21
- Derived rate
- ₹1,457.15 / Sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 12.1.1 — Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.00 mm thick with zinc coating not less than 275 gm/m² — is derived from 21 priced inputs for a roof and works out to ₹1,457.15 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- side 18.09x5.10m and slop being flatter than
- 1 vertical to 2.5 horizontal
- Area of roof = 2x18.09x5.10 = 184.518 sqm.
- C.G.S. sheets 2x27 =54 nos. of size 2.5x0.9
- metre @19.35 Kg each =1044.90Kg.
- 2x27=54 nos. of size
- 2.8x0.9@21.67kg. each =1170.18Kg.+
- Total = 2215.08Kg.+
- Total = 2325.83 Kg = 23.26 quintals
- G.I.Seam bolts and nuts 60cm
- centre to centre zig-zag i.e. 30cm
- centre to centre straight
- Breadth is 5.1metre
- No. of bolts in one lap 5.1/0.3 =17 nos.
- 2x26(laps)x17 nos. = 884 nos.
- G.I.,J or L hooks 8mm dia.
- (No. of purlins to be used 5 on either
- side)2x5x27
- (No. of sheets)x23 nos. of bolts in each
- sheet = 810 nos.
- (total of seam and J bolts)
- 884+810=1694
- Add 5% Wastage = 110.75Kg.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 3050 | Galvanised steel corrugated sheetsMaterial | quintal | 23.26 | 6,105.00 | 1,42,002.30 |
| 1022 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slotsMaterial | 10 Nos | 88.4 | 38.00 | 3,359.20 |
| 1023 | Galvanised steel J or L hooks 8 mm diaMaterial | 10 Nos | 81 | 130.00 | 10,530.00 |
| 1207 | G.I. Limpet washerMaterial | 100 Nos | 16.94 | 21.00 | 355.74 |
| 1208 | Bitumen washerMaterial | 100 Nos | 16.94 | 30.00 | 508.20 |
| 9977 | Carriage of bolts and washersMaterial | L.S. | 26.91 | 2.27 | 61.09 |
| 9999 | SundriesMaterial | L.S. | 53.82 | 2.27 | 122.17 |
| 0130 | MistryLabour | day | 1.3 | 897.00 | 1,166.10 |
| 0112 | Carpenter 2nd classLabour | day | 15.5 | 816.00 | 12,648.00 |
| 0114 | BeldarLabour | day | 15.5 | 736.00 | 11,408.00 |
| 4202 | Red oxide Zinc chromate primerMaterial | litre | 2.53 | 140.00 | 354.20 |
| 9977 | Carriage of materialMaterial | L.S. | 0.52 | 2.27 | 1.18 |
| 0131 | PainterLabour | day | 1.13 | 816.00 | 922.08 |
| 0115 | CoolieLabour | day | 1.13 | 736.00 | 831.68 |
| 9999 | Brushes, sand papers i/c sundriesMaterial | L.S. | 50.57 | 2.27 | 114.79 |
| 0845 | Roofing paint for iron sheets in red colourMaterial | litre | 3.75 | 135.00 | 506.25 |
| 9977 | Carriage of paintMaterial | L.S. | 6.76 | 2.27 | 15.35 |
| 0131 | PainterLabour | day | 2.53 | 816.00 | 2,064.48 |
| 0115 | CoolieLabour | day | 2.53 | 736.00 | 1,862.08 |
| 9999 | Brushes and SandpapersMaterial | L.S. | 31.98 | 2.27 | 72.59 |
| 9999 | SundriesMaterial | L.S. | 38.09 | 2.27 | 86.46 |
- TOTAL
- 1,88,991.94
- Add 1 % Water charges on “W”
- 1,889.92
- TOTAL
- 1,90,881.86
- Add GST on “X” (multiplying factor 0.2127)
- 40,600.57
- TOTAL
- 2,31,482.43
- Add 15% CPOH on “Y”
- 34,722.36
- TOTAL
- 2,66,204.79
- Add Cess @ 1% on “Z”
- 2,662.05
- Cost of 184.518 Sqm.
- 2,68,866.84
- Cost of 1 Sqm.
- 1,457.13
- Say
- 1,457.15
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 851. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works