CPWD Analysis of Rates · Road Work
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment)
Overhead informatory road signage
- Item number
- 16.60.1
- Analysis basis
- Details of cost for boards area 3.00x1.20
- Priced inputs
- 7
- Derived rate
- ₹5,879.90 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 16.60.1 — Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment) Overhead informatory road signage — is derived from 7 priced inputs for boards area and works out to ₹5,879.90 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- =3.60 sqm
- Total = 20.16 + 1.01 = 21.17 kg.
- high intensity sheet for written matter.
- Taking 40% 3.60x40% = 1.44 sqm.
- Total = 3.60 + 1.44 = 5.04 sqm.
- for peripheries = 2x(300+120)/30=28 nos.
- For vertical Rows = 2x (120/30-2)=4 nos.
- Total= 28 + 4 = 32nos.
- For wastage @ 5% =2 nos.
- Total = 32 +2 = 34 nos.
- Labour charges for drilling holes
- Labour charges for manufacturing of board
- including .
- Painting with epoxy paint on back side of
- Aluminium sheet,
- Add 5% wastage = 1.01 kg
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 2704 | Aluminium Strip 40 mm wide and 2 mm thickMaterial | kilogram | 21.17 | 243.00 | 5,144.31 |
| 8690 | High intensity retro - reflective sheetHigh intensity retro - reflective sheet as per IRC 67-2001Material | sqm | 5.04 | 1,345.00 | 6,778.80 |
| 0588 | Chromium plated Brass screws 25 mmMaterial | 100 Nos | 0.34 | 177.00 | 60.18 |
| 9999 | Hire charges of drill machine and sundriesMaterial | L.S. | 52 | 2.27 | 118.04 |
| 9999 | Hoisting boardMaterial | L.S. | 390 | 2.27 | 885.30 |
| 9999 | fixing retro reflective sheetMaterial | L.S. | 564.2 | 2.27 | 1,280.73 |
| Rate as per Item no. 13.52.1 of SH: FinishingRate as per item 13.52.1Sub-analysis | sqm | 3.6 | 241.75 | 870.30 |
- TOTAL
- 15,137.66
- Add 1 % Water charges on “W-A”
- 142.67
- TOTAL
- 15,280.33
- Add GST on “X-A” (multiplying factor 0.2127)
- 3,065.01
- TOTAL
- 18,345.34
- Add 15% CPOH on “Y-A”
- 2,621.26
- TOTAL
- 20,966.60
- Add Cess @ 1% on “Z-A”
- 200.96
- Cost of 3.60 sqm
- 21,167.56
- Cost of 1 sqm.
- 5,879.88
- Say
- 5,879.90
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1246. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works