CPWD Analysis of Rates · Reinforced Cement Concrete
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineerin-Charge
Coupler for 25 mm diameter reinforcement bar
- Item number
- 5.42.3
- Analysis basis
- Detail of cost for 1 Nos
- Priced inputs
- 3
- Derived rate
- ₹228.95 / no
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 5.42.3 — Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineerin-Charge Coupler for 25 mm diameter reinforcement bar — is derived from 3 priced inputs for 1 Nos and works out to ₹228.95 per no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 2396 | Coupler 25 mm diaMaterial | each | 1 | 74.00 | 74.00 |
| 9999 | For placing in position and fixingMaterial | L.S. | 8.69 | 2.27 | 19.73 |
| 9999 | Tapard/Parallel threading chargesMaterial | L.S. | 29.61 | 2.27 | 67.21 |
- TOTAL
- 160.94
- Add 1 % Water charges on “W”
- 1.61
- TOTAL
- 162.55
- Add GST on “X” (multiplying factor 0.2127)
- 34.57
- TOTAL
- 197.12
- Add 15% CPOH on “Y”
- 29.57
- TOTAL
- 226.69
- Add Cess @ 1% on “Z”
- 2.27
- Cost of 1 no
- 228.96
- Say
- 228.95
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 288. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works