Skip to main content

CPWD Analysis of Rates · Reinforced Cement Concrete

Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge

12 mm dia. & 100 mm length

Item number
5.10.1
Analysis basis
Details of cost for wall length 7.90mx1m (24
Priced inputs
5
Derived rate
156.05 / each set

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 5.10.1 Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge 12 mm dia. & 100 mm length — is derived from 5 priced inputs for wall length and works out to ₹156.05 per each set after water charges, GST, CPOH and cess. The full build-up is below.

  • set)
CodeInputUnitQuantityRate (INR)Amount (INR)
7320Tie bolt 12 mm dia 100 mm lengthMaterialeach2440.00960.00
7324Spring coil 12 mmMaterialeach4816.00768.00
7325Plastic cone 12 mm diaMaterialeach4817.00816.00
9977Carriage:MaterialL.S.132.2729.51
9999SundriesMaterialL.S.262.2759.02
TOTAL
2,632.53
Add 1 % Water charges on “W”
26.33
TOTAL
2,658.86
Add GST on “X” (multiplying factor 0.2127)
565.54
TOTAL
3,224.40
Add 15% CPOH on “Y”
483.66
TOTAL
3,708.06
Add Cess @ 1% on “Z”
37.08
Cost for 24 sets
3,745.14
Cost of 1 each set
156.05
Say
156.05

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 238. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works