CPWD Analysis of Rates · Rain Water Harvesting & Tube Wells
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete
150 mm clamp
- Item number
- 23.14.2
- Analysis basis
- Details of cost for 1 No
- Priced inputs
- 2
- Derived rate
- ₹2,019.05 / No
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 23.14.2 — Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete 150 mm clamp — is derived from 2 priced inputs for 1 No and works out to ₹2,019.05 per no after water charges, GST, CPOH and cess. The full build-up is below.
- Clamps made of MS flat of size 100x10mm
- thick1x2.10 mt.x7.80 kg per mt.=16.38 kg.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| Rate as per Item No.10.1 of SH:Steel WorkRate as per item 10.1Sub-analysis | kg | 16.38 | 117.35 | 1,922.19 | |
| 9999 | Sundries, nuts and bolts etc.Material | L.S. | 30 | 2.27 | 68.10 |
- TOTAL
- 1,990.29
- Add 1 % Water charges on “W-A”
- 0.68
- TOTAL
- 1,990.97
- Add GST on “X-A” (multiplying factor 0.2127)
- 14.63
- TOTAL
- 2,005.60
- Add 15% CPOH on “Y-A”
- 12.51
- TOTAL
- 2,018.11
- Add Cess @ 1% on “Z-A”
- 0.96
- Cost of 1 No
- 2,019.07
- Say
- 2,019.05
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1883. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works