CPWD Analysis of Rates · New Technologies and Materials
Supplying of standard quality GFRG panel of 124 mm thickness with modular cavities purchased from GFRG panel manufacturing plant in the country, cut to required wall sizes and floor/ roof slab sizes in correct length and height, including cutting of door, window and ventilator opening as per the cutting drawing prepared by architects /design engineers for the construction of GFRG building and loaded in stillages for transportation to the construction site. Cost of panel includes security deposits, hire charges of stillages & jaws, cost of transportation in trucks/ lorries without any damages upto 300kms including all leads and lifts from GFRG manufacturing plant to construction site and unloading at site using suitable fork lift/ crane. (Payment shall be made on the basis of area of one side of panel without reduction of opening of door/ window / ventilator). For transportation above 300kms, additional charges to be paid
- Item number
- 26.51
- Analysis basis
- Detail of cost for 1sqm.
- Priced inputs
- 3
- Derived rate
- ₹1,477.30 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 26.51 — Supplying of standard quality GFRG panel of 124 mm thickness with modular cavities purchased from GFRG panel manufacturing plant in the country, cut to required wall sizes and floor/ roof slab sizes in correct length and height, including cutting of door, window and ventilator opening as per the cutting drawing prepared by architects /design engineers for the construction of GFRG building and loaded in stillages for transportation to the construction site. Cost of panel includes security deposits, hire charges of stillages & jaws, cost of transportation in trucks/ lorries without any damages upto 300kms including all leads and lifts from GFRG manufacturing plant to construction site and unloading at site using suitable fork lift/ crane. (Payment shall be made on the basis of area of one side of panel without reduction of opening of door/ window / ventilator). For transportation above 300kms, additional charges to be paid — is derived from 3 priced inputs and works out to ₹1,477.30 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Panel area = 1.00sqm, Add wastage @ 5%
- = 0.050sqm, Total area = 1.05 sqm
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7368 | GFRG panel of 124mm thickGFRG Panel of 124 mm thickMaterial | sqm | 1.05 | 896.00 | 940.80 |
| 9999 | Transportation of panel in suitable truck (Rs 0.15/sqm/km) upto 300 KmMaterial | L.S. | 26 | 2.27 | 59.02 |
| 9999 | Hire Charges for Stillages/Lifting jaw, unloading of panel at site using for lift or crane, Hire Charges for Stillages/Lifting jawMaterial | L.S. | 17 | 2.27 | 38.59 |
- TOTAL
- 1,038.41
- Add 1% water charges
- 10.38
- TOTAL
- 1,048.79
- Add GST on “X” (multiplying factor 0.2127)
- 223.08
- TOTAL
- 1,271.87
- Add 15% CPOH on “Y”
- 190.78
- TOTAL
- 1,462.65
- Add Cess @1% on “Z”
- 14.63
- Cost of 1 sqm
- 1,477.28
- Say
- 1,477.30
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1984. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works