CPWD Analysis of Rates · New Technologies and Materials
Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm
Cement Fiber Board 6 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured)
- Item number
- 26.45.1
- Analysis basis
- Details of cost for 10 Sqm
- Priced inputs
- 5
- Derived rate
- ₹1,430.15 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 26.45.1 — Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm Cement Fiber Board 6 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured) — is derived from 5 priced inputs for 10 Sqm and works out to ₹1,430.15 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- For cutting and fixing of Cement & gypsum
- board
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 0238 | 6 mm thick fibre cement board 10 sqm +1 sqm (Add for wastage @10%)=11.00 sqm6 mm thick Fibre Cement Board Type A, Category IV as per IS 14862:2000Material | Sqm | 11 | 510.00 | 5,610.00 |
| 2635 | GI screws of gauge 10, length 25 mm for fixing cement fibre board to C section Tapping and finishing Cement board jointsGI Screws of gauge 10, length 25 mm for fixing cement fibre board to C sectionMaterial | each | 40 | 3.30 | 132.00 |
| Filling the Grove of 2 mm to 3 mm between 6 mm and 10 mm thick cement bonded particle boardsRate as per item Sub A/R 1Sub-analysis | Sqm | 10 | 95.40 | 954.00 | |
| 0112 | Carpenter 2nd classLabour | day | 1.11 | 816.00 | 905.76 |
| 0114 | BeldarLabour | day | 3.33 | 736.00 | 2,450.88 |
- TOTAL
- 10,052.64
- Add 1 % Water charges on “W”
- 100.53
- TOTAL
- 10,153.17
- Add GST on “X” (multiplying factor 0.2127)
- 2,159.58
- TOTAL
- 12,312.75
- Add 15% CPOH on “Y”
- 1,846.91
- TOTAL
- 14,159.66
- Add Cess @ 1% on “Z”
- 141.60
- Cost of 10 sqm
- 14,301.26
- Cost of 1 sqm
- 1,430.13
- Say
- 1,430.15
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1969. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works