How is the CPWD rate for Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles (item 26.22.1) derived?

Question

Accepted Answer

The DAR 2023 works item 26.22.1 from 15 priced inputs for 100 sqm — material, labour and machinery each at the CPWD Basic Rate — then adds water charges, GST, contractor's profit and overheads (CPOH) and cess to reach ₹2,207.00 per sqm. The full build-up is shown on this page.

Code	Input	Unit	Quantity	Rate (INR)	Amount (INR)
8589	Calcium Slicate tegular edged Flase ceiling tiles 595x595 mm and 15 mm thickCalcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edgesMaterial	sqm	105	822.00	86,310.00
8590	Galavanised iron main Tee ceiling section Size 24x38x0.33 mm (3 metre long) including wastage @ 10%Galvanised Steel main Tee ceiling section size 24x38x0.33 mm (3 metre long)Material	each	29.5	167.00	4,926.50
8591	Galavanised iron perimeter wall Angle Size 24x24x0.40 mm (3.00 metre long) including wastage @ 10%Galvanised Steel perimeter wall Angle size 24 x 24 x 0.40 mm (3.00 metre long)Material	each	13.5	114.00	1,539.00
8592	Galavanised iron intermediate cross T section Size 24x32x0.33 mm (1.2 metre long) including wastage @ 10%Galvanised Steel intermediate cross T section size 24 x 25 x 0.33 mm (1.2 metre long)Material	each	147	54.00	7,938.00
8593	Glavanised iron intermediate cross T section Size 24 x 32x 0.33 mm (0.6 metre long)Galvanised Steel intermediate cross T section size 24 x 25 x 0.33 mm (0.6 metre long)Material	each	147	27.00	3,969.00
8588	Galavanised MS hanger rod 6 mm dia MS fully threaded up to 1000 mm lengthMaterial	each	72	17.00	1,224.00
5775	Galavinised MS L-shape level adjuster of size 76x25x25x1.6 mmMaterial	each	72	15.00	1,080.00
5776	12x50 mm long dash fastenerMaterial	each	72	35.00	2,520.00
5777	Galvanized MS Z Cleat of size 25 x 37 x 25 x 1.6 mm with precut hole on both 25 mm flangeMaterial	each	72	13.00	936.00
8211	40 mm long S.S screws with plastic rawl plugsStainless steel screws 40 mmMaterial	100 nos.	1	270.00	270.00
9999	Scaffolding etc.Material	L.S.	498.65	2.27	1,131.94
9977	Carriage of materails etc.Material	L.S.	237.48	2.27	539.08
9999	SundriesMaterial	L.S.	310.7	2.27	705.29
0111	Carpenter 1st classLabour	day	28	897.00	25,116.00
0114	BeldarLabour	day	23	736.00	16,928.00

Use this rate in a live estimate