CPWD Analysis of Rates · Flooring
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete
Size of Tile 1000x1000 mm
- Item number
- 11.46.4
- Analysis basis
- Detail of cost for 10 sqm
- Priced inputs
- 8
- Derived rate
- ₹2,162.60 / sqm
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 11.46.4 — Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 1000x1000 mm — is derived from 8 priced inputs for 10 sqm and works out to ₹2,162.60 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
- Vitrified floor tiles 100 x 100 cm size = 10
- sqm+
- sqm
- Total = 10.25 sqm
- 12 mm thick Cement mortar 1 : 3 (1
- cement : 3 coarse sand)
- Cement slurry over bed @ 3.3 kg per
- sqm
- Add wastage & breakage @ 2.5% = 0.25
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 8623 | Vitrified floor tile 100x100 cmVitrified floor tile 100x100 cm conforming to IS 15622:2006 group (B1a)Material | sqm | 10.25 | 920.00 | 9,430.00 |
| 9977 | Carriage of tilesMaterial | L.S. | 62.4 | 2.27 | 141.65 |
| Rate as per Item No.3.8 of SH:MORTARSRate as per item 3.8Sub-analysis | cum | 0.14 | 4,881.95 | 683.47 | |
| 9999 | Mortar for pointing in white cementMaterial | L.S. | 36.4 | 2.27 | 82.63 |
| 0367 | Portland CementPortland Cement (OPC-43 Grade)Material | tonne | 0.033 | 5,156.00 | 170.15 |
| 0123 | Mason 1st classMason 1st classLabour | day | 2.5 | 897.00 | 2,242.50 |
| 0115 | CoolieLabour | day | 2.5 | 736.00 | 1,840.00 |
| 9988 | Sundries including carriage of quick set polymer etcMaterial | L.S. | 269.1 | 2.27 | 610.86 |
- TOTAL
- 15,201.26
- Add 1 % Water charges on “W”
- 152.01
- TOTAL
- 15,353.27
- Add GST on “X” (multiplying factor 0.2127)
- 3,265.64
- TOTAL
- 18,618.91
- Add 15% CPOH on “Y”
- 2,792.84
- TOTAL
- 21,411.75
- Add Cess @ 1% on “Z”
- 214.12
- Cost of 10 sqm
- 21,625.87
- Cost for 1 sqm
- 2,162.59
- Say
- 2,162.60
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 831. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works