Skip to main content

CPWD Analysis of Rates · Flooring

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks

Item number
11.2
Analysis basis
Details of cost for 10 sqm.
Priced inputs
6
Derived rate
792.05 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks — is derived from 6 priced inputs for 10 sqm and works out to ₹792.05 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
2602Common burnt clay F.P.S. (non modular) bricks class designation 7.5Material1000 Nos0.6454,724.003,046.98
0983Fine sand (zone IV)Materialcum0.15980.00147.00
Rate as per Item Number 3.18 of SH: MortarsRate as per item 3.18Sub-analysiscum0.15940.55141.08
0124Mason 2nd classMason 2nd classLabourday0.9816.00734.40
0115CoolieLabourday1.98736.001,457.28
0101BhistiLabourday0.05816.0040.80
TOTAL
5,567.54
Add 1 % Water charges on “W”
55.68
TOTAL
5,623.22
Add GST on “X” (multiplying factor 0.2127)
1,196.06
TOTAL
6,819.28
Add 15% CPOH on “Y”
1,022.89
TOTAL
7,842.17
Add Cess @ 1% on “Z”
78.42
Cost of 10 sqm.
7,920.59
Cost of 1 sqm.
792.06
Say
792.05

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 756. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works