Skip to main content

CPWD Analysis of Rates · Finishing

Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant

Item number
13.58
Analysis basis
Detail of cost for 10 sqm
Priced inputs
6
Derived rate
334.50 / sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 13.58 Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant — is derived from 6 priced inputs for 10 sqm and works out to ₹334.50 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
7240Fire retardant paintMateriallitre5.7259.001,476.30
9977Carriage of materialMaterialL.S.1.432.273.25
0131PainterLabourday0.54816.00440.64
0114BeldarLabourday0.54736.00397.44
9999Putty, brushes, sand paper etcMaterialL.S.6.762.2715.35
9999SundriesMaterialL.S.8.062.2718.30
TOTAL
2,351.28
Add 1 % Water charges on “W”
23.51
TOTAL
2,374.79
Add GST on “X” (multiplying factor 0.2127)
505.12
TOTAL
2,879.91
Add 15% CPOH on “Y”
431.99
TOTAL
3,311.90
Add Cess @ 1% on “Z”
33.12
Cost of 10.00 sqm
3,345.02
Cost of 1.00 sqm
334.50
Say
334.50

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 998. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works