CPWD Analysis of Rates · Cladding Work
Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete
50 mm long
- Item number
- 8.24.4
- Analysis basis
- Details of cost of 10 nos.
- Priced inputs
- 2
- Derived rate
- ₹29.75 / no
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 8.24.4 — Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete 50 mm long — is derived from 2 priced inputs and works out to ₹29.75 per no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7315 | Expandable fastner with plastic sleeve and M.S. screws. 50 mm longExpandable fastener with plastic sleeve and M.S. screws. 50 mm longMaterial | each | 10 | 15.00 | 150.00 |
| 9999 | Labour for drilling holes and making good etc.Material | L.S. | 26 | 2.27 | 59.02 |
- TOTAL
- 209.02
- Add 1 % Water charges on “W”
- 2.09
- TOTAL
- 211.11
- Add GST on “X” (multiplying factor 0.2127)
- 44.90
- TOTAL
- 256.01
- Add 15% CPOH on “Y”
- 38.40
- TOTAL
- 294.41
- Add Cess @ 1% on “Z”
- 2.94
- Cost of 10 nos.
- 297.35
- Cost of 1 no.
- 29.74
- Say
- 29.75
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 422. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works