CPWD Analysis of Rates · Aluminium Work
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge
Polyester powder coated minimum thickness 50 micron aluminium
- Item number
- 21.16.3
- Analysis basis
- Detail of cost for 10 nos.
- Priced inputs
- 4
- Derived rate
- ₹112.15 / nos
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 21.16.3 — Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge Polyester powder coated minimum thickness 50 micron aluminium — is derived from 4 priced inputs for 10 nos and works out to ₹112.15 each after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 8665 | Aluminium round shape handle (polyester powder coated) outer dia 100 mmMaterial | each | 10 | 71.00 | 710.00 |
| 8666 | Stainless steel screws 25 mm x4 mmMaterial | 100 Nos | 0.4 | 46.00 | 18.40 |
| 0111 | Carpenter 1st classLabour | day | 0.06 | 897.00 | 53.82 |
| 9977 | Carriage of materialsMaterial | L.S. | 2.73 | 2.27 | 6.20 |
- TOTAL
- 788.42
- Add 1 % Water charges on “W”
- 7.88
- TOTAL
- 796.30
- Add GST on “X” (multiplying factor 0.2127)
- 169.37
- TOTAL
- 965.67
- Add 15% CPOH on “Y”
- 144.85
- TOTAL
- 1,110.52
- Add Cess @ 1% on “Z”
- 11.11
- Cost of 10 nos
- 1,121.63
- Cost of 1 nos
- 112.16
- Say
- 112.15
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1838. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works