Skip to main content

CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

100x10 mm

Item number
9.97.5
Analysis basis
Details of cost for 10 nos.
Priced inputs
4
Derived rate
64.70 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.97.5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm — is derived from 4 priced inputs for 10 nos and works out to ₹64.70 per no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
0702Anodised Aluminium tower bolt (barrel type)100x10 mmAnodised Aluminium tower bolt (barrel type) 100x10 mmMaterial10 Nos1240.00240.00
0587Chromium plated Brass screws 30 mmMaterial100 Nos0.6228.00136.80
9977Carriage of materialsMaterialL.S.2.732.276.20
0111Carpenter 1st classLabourday0.08897.0071.76
TOTAL
454.76
Add 1 % Water charges on “W”
4.55
TOTAL
459.31
Add GST on “X” (multiplying factor 0.2127)
97.70
TOTAL
557.01
Add 15% CPOH on “Y”
83.55
TOTAL
640.56
Add Cess @ 1% on “Z”
6.41
Cost of 10 nos
646.97
Cost of 1 no
64.70
Say
64.70

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 568. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works