Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Casement Window with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel
- Item number
- 9.147.E6.1
- Analysis basis
- uPVC casement
- Priced inputs
- 14
- Derived rate
- ₹22,785.35/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.147.E6.1 (Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Casement Window with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel Using R3 series with frame (110mm & above) x (45mm & above) & glazed sash (55mm & above) x (65mm & above) & fly screen sash (30mm & above) x (55mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre)) is derived from 14 priced inputs for uPVC casement and works out to ₹22,785.35 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| OTHER | 0.7 m x 1.5 m = 1.05 sqm. | 700 | 1,500 | — | — | |
| 8167 | MAT | uPVC extruded range R3 Casement double rebate frame size (110mm & above) x (45mm & above) (including 5% wastage)uPVC extruded range R3 Casement double rebate frame size (110 mm & above) x (45 mm & above) | metre | 4.62 | 695.00 | 3,210.90 |
| 8168 | MAT | uPVC extruded range R3 casement window sash/ door fly screen sash/ window mullion/ door mullion size (55mm & above) x (65mm & above) (including 5% wastage)uPVC extruded range R3 casement window sash/ door fly screen sash/window mullion/door mullion size (55 mm & above) x (65 mm & above) | metre | 4.43 | 448.00 | 1,984.64 |
| 8170 | MAT | uPVC extruded range R3 casement window fly screen sash size (30mm & above) x (55mm & above) (including 5% wastage)uPVC extruded range R3 casement window fly screen sash size (30 mm & above) x (55 mm & above) | metre | 4.43 | 236.00 | 1,045.48 |
| 8172 | MAT | uPVC extruded glazing bead of appropriate dimension for range R3 casement window/ door (including 5% wastage)uPVC extruded glazing bead of appropriate dimension for range R3 casement window/ door | metre | 8 | 124.00 | 992.00 |
| 3992 | MAT | Galvanized iron reinforcement of minimum thickness 1.5 mm for range R3 and R4 for casement frame/ window/Door sash/ mullion and sliding frame (including 5% wastage)Galvanized iron reinforcement of minimum thickness 1.5 mm for range R3 and R4 for casement frame/ window/Door sash/ mullion and sliding frame | metre | 16.72 | 80.00 | 1,337.60 |
| 7390 | MAT | EPDM Gasket for uPVC window (including 5% wastage)EPDM Gasket for uPVC window/door | metre | 49.69 | 16.00 | 795.04 |
| 7217 | MAT | SS anchor Fasteners (RCC / Brick) – M-8x75mm / M-10x100mmSS anchor Fasteners (RCC / Brick) – M-8x75 mm/M-10x100 mm | each | 10 | 76.00 | 760.00 |
| 8759 | MAT | Stainless steel friction hinges (SS-304 grade) size 400 x 19 x 1.9 mm for uPVC window | each | 4 | 405.00 | 1,620.00 |
| 8118 | MAT | Zinc alloy (white powder coated) handles along with zinc plated mild steel multi point locking having transmission gear with keeps for uPVC sliding / casement window | each | 2 | 1,455.00 | 2,910.00 |
| 8646 | MAT | Weather Silicone sealantWeather Silicon sealant | each | 1.68 | 125.00 | 210.00 |
| 9999 | MAT | Sundries, plastic packers, plastic caps, SS screws and carriage of material | L.S. | 170 | 2.27 | 385.90 |
| 0162 | LAB | Labour for fabrication of uPVC extruded fixed windows including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etcLabour for fabrication of uPVC extruded casement/ sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc. | sqm | 1.05 | 609.00 | 639.45 |
| 0163 | LAB | Labour for installation of uPVC extruded fixed windows including scaffoldingLabour for installation of uPVC extruded casement/ sliding windows and doors including scaffolding | sqm | 1.05 | 882.00 | 926.10 |
- TOTAL
- 16,817.11
- Add 1 % Water charges on “W”
- +168.17
- TOTAL
- 16,985.28
- Add GST on “X” (multiplying factor 0.2127)
- +3,612.77
- TOTAL
- 20,598.05
- Add 15% CPOH on “Y”
- +3,089.71
- TOTAL
- 23,687.76
- Add Cess @ 1% on “Z”
- +236.88
- Cost of 1.05 sqm
- 23,924.64
- Cost of 1.00 sqm
- 22,785.37
- SAY
- ₹22,785.35
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 678
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 678. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.