Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body
- Item number
- 9.147.B4.1
- Analysis basis
- uPVC sliding
- Priced inputs
- 17
- Derived rate
- ₹8,287.05/ SQM
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.147.B4.1 (Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body Using R3 series with frame (98mm & above) x (40mm & above) & sash (30mm & above) x (74mm & above). (Height upto 2.5 metre)) is derived from 17 priced inputs for uPVC sliding and works out to ₹8,287.05 per sqm after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Type | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|---|
| OTHER | 2.1 m = 5.67 sqm. | 2700 | 2,100 | — | — | |
| 8159 | MAT | uPVC extruded range R3 three track sliding window/door frame size (98mm & above) x (40mm & above) (including 5% wastage)uPVC extruded range R3 3-track sliding window/door frame size (98 mm & above) x (40 mm & above) | metre | 10.08 | 431.00 | 4,344.48 |
| 8161 | MAT | uPVC extruded 2 track sliding door sash/ 3 track sliding door sash range R3 size (30mm & above) x (74mm & above) (including 5% wastage)uPVC extruded 2 track sliding door sash/ 3 track sliding door sash range R3 size (30 mm & above) x (74 mm & above) | metre | 18.55 | 361.00 | 6,696.55 |
| 8163 | MAT | uPVC extruded interlock / inline adaptor of appropriate dimension for range R3 sliding window/ door sash (including 5% wastage)uPVC extruded interlock/ inline adaptor of appropriate dimension for range R3 sliding window/ door sash | metre | 8.47 | 110.00 | 931.70 |
| 8164 | MAT | uPVC extruded glazing bead of appropriate dimension for range R3 of sliding window/ door sash (including 5% wastage)uPVC extruded glazing bead of appropriate dimension for range R3 of sliding window/ door sash | metre | 16.81 | 90.00 | 1,512.90 |
| 3992 | MAT | Galvanized iron reinforcement of minimum thickness 1.5 mm for range R3 and R4 for casement frame/ window/Door sash/ mullion and sliding frame (including 5% wastage)Galvanized iron reinforcement of minimum thickness 1.5 mm for range R3 and R4 for casement frame/ window/Door sash/ mullion and sliding frame | metre | 19.32 | 80.00 | 1,545.60 |
| 3994 | MAT | Galvanized iron reinforcement of minimum thickness 1.5 mm for range R3 and R4 for sliding window/ door sash (including 5% wastage)Galvanized iron reinforcement of minimum thickness 1.5 mm for range R3 and R4 for sliding window/ door sash | metre | 16.81 | 95.00 | 1,596.95 |
| 7390 | MAT | EPDM Gasket for uPVC door/door (including 5% wastage)EPDM Gasket for uPVC window/door | metre | 33.63 | 16.00 | 538.08 |
| 8773 | MAT | Wool pile/ weather pile strip for uPVC sliding door (including 5% wastage)Wool pile/ weather pile strip for uPVC sliding window | metre | 28.64 | 22.00 | 630.08 |
| 8772 | MAT | Aluminium Track on bottom rail for uPVC window (including 5% wastage)Aluminium Track on bottom rail for uPVC window | metre | 8.19 | 40.00 | 327.60 |
| 7217 | MAT | SS anchor Fasteners (RCC / Brick) – M-8x75mm / M-10x100mmSS anchor Fasteners (RCC / Brick) – M-8x75 mm/M-10x100 mm | each | 18 | 76.00 | 1,368.00 |
| 8119 | MAT | Zinc alloy (white powder coated) handles with key along with zinc plated mild steel multi point locking having transmission gear with keeps for uPVC sliding door | each | 2 | 1,765.00 | 3,530.00 |
| 8753 | MAT | Stainless Steel (SS - 304) with adjustable double nylon roller (weight bearing capacity to be 120 Kg) for uPVC sliding doorStainless Steel (SS - 304) with adjustable double nylon roller (weight bearing capacity to be 120 Kg) for uPVC sliding door/window | each | 6 | 118.00 | 708.00 |
| 8646 | MAT | Weather Silicone sealantWeather Silicon sealant | each | 3.67 | 125.00 | 458.75 |
| 9999 | MAT | Sundries, plastic packers, plastic caps, SS screws and carriage of material | L.S. | 170 | 2.27 | 385.90 |
| 0162 | LAB | Labour for fabrication of uPVC extruded sliding doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etcLabour for fabrication of uPVC extruded casement/ sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc. | sqm | 5.67 | 609.00 | 3,453.03 |
| 0163 | LAB | Labour for installation of uPVC extruded sliding doors including scaffoldingLabour for installation of uPVC extruded casement/ sliding windows and doors including scaffolding | sqm | 5.67 | 882.00 | 5,000.94 |
- TOTAL
- 33,028.56
- Add 1 % Water charges on “W”
- +330.29
- TOTAL
- 33,358.85
- Add GST on “X” (multiplying factor 0.2127)
- +7,095.43
- TOTAL
- 40,454.28
- Add 15% CPOH on “Y”
- +6,068.14
- TOTAL
- 46,522.42
- Add Cess @ 1% on “Z”
- +465.22
- Cost of 5.67 sqm
- 46,987.64
- Cost of 1.00 sqm
- 8,287.06
- SAY
- ₹8,287.05
- PUBLISHED BY
- Central Public Works Department (CPWD)
- EDITION
- DAR 2023 · Delhi
- EFFECTIVE
- 2023-09-14Both volumes are dated 14 September 2023 on their title pages.
- RETRIEVED
- 2026-09-08
- GST
- 18%, added in each item's build-up
- PRINTED PAGE
- 650
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 650. For reference only. CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. We can do this for you: send the tender and we return a priced BOQ on the applicable schedule, with rate build-ups and an engineer's sign-off.