Skip to main content

CPWD Analysis of Rates · Wood and PVC Work

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

75 mm

Item number
9.100.3
Analysis basis
Details of cost for 10 nos.
Priced inputs
4
Derived rate
51.75 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 9.100.3 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 75 mm — is derived from 4 priced inputs for 10 nos and works out to ₹51.75 per no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
0705Anodised Aluminium handles 75mm with plate 125 x 32 mmAnodised Aluminium handles 75 mm with plate 125 x 32 mmMaterial10 Nos1245.00245.00
0589Chromium plated Brass screws 20 mmMaterial100 Nos0.4152.0060.80
9977Carriage of materialsMaterialL.S.1.822.274.13
0111Carpenter 1st classLabourday0.06897.0053.82
TOTAL
363.75
Add 1 % Water charges on “W”
3.64
TOTAL
367.39
Add GST on “X” (multiplying factor 0.2127)
78.14
TOTAL
445.53
Add 15% CPOH on “Y”
66.83
TOTAL
512.36
Add Cess @ 1% on “Z”
5.12
Cost of 10 nos
517.48
Cost of 1 no
51.75
Say
51.75

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 570. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works