CPWD Analysis of Rates · Water Supply
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball
25 mm nominal bore, 152mm long, weighing not less than 440 gms
- Item number
- 18.62.3
- Analysis basis
- Details of cost for one no.
- Priced inputs
- 2
- Derived rate
- ₹523.80 / one no
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 18.62.3 — Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 25 mm nominal bore, 152mm long, weighing not less than 440 gms — is derived from 2 priced inputs for one no and works out to ₹523.80 per one no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7497 | PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. BallPTMT Ball Cock 25 mm complete with Epoxy Coated Aluminium Rod & H.D. BallMaterial | each | 1 | 295.00 | 295.00 |
| 9988 | Carriage of materials and fixing chargesMaterial | L.S. | 32.24 | 2.27 | 73.18 |
- TOTAL
- 368.18
- Add 1 % Water charges on “W”
- 3.68
- TOTAL
- 371.86
- Add GST on “X” (multiplying factor 0.2127)
- 79.09
- TOTAL
- 450.95
- Add 15% CPOH on “Y”
- 67.64
- TOTAL
- 518.59
- Add Cess @ 1% on “Z”
- 5.19
- Cost of one no.
- 523.78
- Say
- 523.80
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1517. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works