CPWD Analysis of Rates · Water Supply
Providing and fixing PTMT bib cock of approved quality and colour
15 mm nominal bore, 122mm long, weighing not less than 99 gms
- Item number
- 18.54.2
- Analysis basis
- Details of cost for 1 no.
- Priced inputs
- 2
- Derived rate
- ₹161.20 / no
Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 18.54.2 — Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 122mm long, weighing not less than 99 gms — is derived from 2 priced inputs for 1 no and works out to ₹161.20 per no after water charges, GST, CPOH and cess. The full build-up is below.
| Code | Input | Unit | Quantity | Rate (INR) | Amount (INR) |
|---|---|---|---|---|---|
| 7401 | 15 mm PTMT bib cockwith flange (fancy)15 mm PTMT bib cock with flange (fancy)Material | each | 1 | 95.00 | 95.00 |
| 9988 | Carriage of materials and fixing chargesMaterial | L.S. | 8.06 | 2.27 | 18.30 |
- TOTAL
- 113.30
- Add 1 % Water charges on “W”
- 1.13
- TOTAL
- 114.43
- Add GST on “X” (multiplying factor 0.2127)
- 24.34
- TOTAL
- 138.77
- Add 15% CPOH on “Y”
- 20.82
- TOTAL
- 159.59
- Add Cess @ 1% on “Z”
- 1.60
- Cost of 1 no.
- 161.19
- Say
- 161.20
From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1507. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.
Use this rate in a live estimate
This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.
See how estimation works