Skip to main content

CPWD Analysis of Rates · Water Supply

18.100.A Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Male Threaded Elbow 90° For 15mm outer dia X 1/2” nominal dia threaded

CPWD DAR 2023›Water Supply
Item number
18.100A.1
Analysis basis
Details of cost for 1 no.
Priced inputs
1
Derived rate
₹832.25 / no

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 18.100A.1 — 18.100.A Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Male Threaded Elbow 90° For 15mm outer dia X 1/2” nominal dia threaded — is derived from 1 priced inputs for 1 no and works out to ₹832.25 per no after water charges, GST, CPOH and cess. The full build-up is below.

CodeInputUnitQuantityRate (INR)Amount (INR)
3947Stainless steel Male Threaded Elbow 90° for 15mm outer dia X 1/2” nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN-10312SS Male Threaded Elbow 90° for 15 mm outer dia X 1/2” nominal dia threaded of grade 316L as per IS 6911:2017 and conforming to EN- 10312 standardMaterialeach1585.00585.00
TOTAL
585.00
Add 1 % Water charges on “W”
5.85
TOTAL
590.85
Add GST on “X” (multiplying factor 0.2127)
125.67
TOTAL
716.52
Add 15% CPOH on “Y”
107.48
TOTAL
824.00
Add Cess @ 1% on “Z”
8.24
Cost of 1 no.
832.24
Say
832.25

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1677. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works