Skip to main content

CPWD Analysis of Rates · Water Proofing

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with

Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322

Item number
22.8.1
Analysis basis
Detail of cost for 30 sqm
Priced inputs
9
Derived rate
515.05 / Sqm

Under the CPWD Delhi Analysis of Rates 2023 (Civil), item 22.8.1 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 — is derived from 9 priced inputs for 30 sqm and works out to ₹515.05 per sqm after water charges, GST, CPOH and cess. The full build-up is below.

  • Blown or / and residual bitumen applied hot =
  • 2x1.45x30 = 87 kg
  • Hession felt type 3 Grade I (hessian base self
  • finished bitumen felt) = 30sqm + Add for over
  • lapping @ 10% = 3 sqm. Total = 33 Sqm
  • 30x6=180 cudm
  • I/c Hession felt =0.087t+2.7x0.001x33=0.176t
  • = 2 quintals/t of bitumen i.e. 2x0.087 =0.174q
CodeInputUnitQuantityRate (INR)Amount (INR)
0313Blown type petroleum bitumen of penetration 85/25 of approved qualityMaterialtonne0.08738,250.003,327.75
0322Bitumen felt :Type 3 grade 1Materialsqm3380.002,640.00
1177Stone grit 6 mm and down size or pea sized gravelMaterialcum0.18985.00177.30
0370Coal (steam)Materialquintal0.174500.0087.00
9999Praparing roof surface, sutting groove and making good etcMaterialL.S.134.552.27305.43
0131PainterLabourday2.16816.001,762.56
0114BeldarLabourday3.24736.002,384.64
0130MistryLabourday0.18897.00161.46
9999Sundries, brushes etc.MaterialL.S.6.762.2715.35
TOTAL
10,861.49
Add 1 % Water charges on “W”
108.61
TOTAL
10,970.10
Add GST on “X” (multiplying factor 0.2127)
2,333.34
TOTAL
13,303.44
Add 15% CPOH on “Y”
1,995.52
TOTAL
15,298.96
Add Cess @ 1% on “Z”
152.99
Cost of 30.00 Sqm.
15,451.95
Cost of 1.00 Sqm.
515.07
Say
515.05

From the CPWD Delhi Analysis of Rates 2023 (Civil), Volumes I & II, printed page 1852. Reference only — CPWD amends rates through correction slips between editions, so verify against the official source before pricing a bid.

Use this rate in a live estimate

This is the CPWD base analysis. A real estimate adjusts it for the project's inputs and the current cost index, then maps it to the tender's BOQ. Arched reads the tender, maps it to the applicable schedule, and flags where the numbers are exposed before submission.

See how estimation works